Your donations help keep this valuable resource free and growing. Thank you.
|
Rally Pack Junction Box |
Post Reply | Page <123> |
Author | |
billd
Moderator Group Forum Administrator Joined: Jun/27/2007 Location: Iowa Status: Offline Points: 30894 |
Post Options
Thanks(0)
|
u r welcome.
|
|
AMX09652
AMC Addicted Charter Member Joined: Jun/29/2007 Location: Texas Status: Offline Points: 954 |
Post Options
Thanks(0)
|
Are we talking about a 1970 Rally Pac only? I thought the 68 and 69 harness came out through the plate under the master cylinder. |
|
1969 BBO AMX 390 4 speed "Deep in the heart of Texas" |
|
CloudyB
Supporter of TheAMCForum Joined: Jul/05/2007 Location: United States Status: Offline Points: 2369 |
Post Options
Thanks(0)
|
Thats what was getting me confused.I've got a 70.
|
|
billd
Moderator Group Forum Administrator Joined: Jun/27/2007 Location: Iowa Status: Offline Points: 30894 |
Post Options
Thanks(0)
|
Mine is a '70 so the photos reference a proper 1970 install only.
|
|
CloudyB
Supporter of TheAMCForum Joined: Jul/05/2007 Location: United States Status: Offline Points: 2369 |
Post Options
Thanks(0)
|
Couldn't have done it without your help billd. THank you.
|
|
Steve_P
AMC Addicted Charter Member Joined: Jun/28/2007 Status: Offline Points: 3806 |
Post Options
Thanks(0)
|
68 should come thru the plate as per the instructions.
|
|
Pauls70AMX
AMC Apprentice Joined: Aug/28/2007 Location: Florida Status: Offline Points: 101 |
Post Options
Thanks(0)
|
Cloudyb:
The heavy wire from battery to starter relay and from the starter relay to starter does not move. Remove red wire that goes to the alternator and starter relay, that red wire goes to the junction block then to gauge, from gauge ( black ) back to junction block. on junction block put fuse link to small post ( black ) then back to starter relay post ( that you removed the alternator wire ) E-mail me picture again with new wiring.
Paul
|
|
70 AMX-4 speed-412 service block-Ross Custom piston-Crane Roller cam-Indy intake-Edelbrock heads-Canton 8qt road pan w/ girdle-MSD-Hooker headers-roller rockers-rally pac- go pac-Ford 9"-60,000 mile
|
|
CloudyB
Supporter of TheAMCForum Joined: Jul/05/2007 Location: United States Status: Offline Points: 2369 |
Post Options
Thanks(0)
|
You got me confused now.
|
|
CloudyB
Supporter of TheAMCForum Joined: Jul/05/2007 Location: United States Status: Offline Points: 2369 |
Post Options
Thanks(0)
|
Instructions Say:
Remove red wire from Starter solenoid and install detached wire to the 5/16" terminal of Junction block.To the 5/16" terminal of the junction block, attach red wire of rally pack harness, and secure wires with nut and lockwasher provided.
Connect black wire lead of harness to #10 stud of junction, and to #10 also fusible link.Secure with nut and lockwasher provided.
Connect other end of fusible link wire to starter solenoid from wich ed wire was opreviously disconnected.
|
|
CloudyB
Supporter of TheAMCForum Joined: Jul/05/2007 Location: United States Status: Offline Points: 2369 |
Post Options
Thanks(0)
|
This is what I have
|
|
Post Reply | Page <123> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |