Your donations help keep this valuable resource free and growing. Thank you.
|
New Moroso V8 Oil Pan |
Post Reply | Page 123 5> |
Author | |
jcisworthy
AMC Addicted Joined: Jul/23/2009 Location: North Carolina Status: Offline Points: 2805 |
Post Options
Thanks(1)
Posted: Jul/22/2020 at 12:19pm |
I've been talking to Moroso and the aluminum pan AR posted for the SEMA project is slated to be made available sometime in the near, I think, future.
I also talked to them about producing a steel factory replacement pan similar to the "factory appearing" pan I make for customer engines. It is slightly deeper than factory which holds 7.5-8 quarts with an FL1A quart filter. It seems there is an excellent possibility that Moroso will produce a steel pan similar to what I make only it will have the rear drain like the older oil pans. It will have a pickup similar to the canton road race pan which I use for my pans. This would be a performance and or factory replacement pan without the aluminum pan price. Is there any interest in such a pan. Personally, if a pan that takes away 0 to 1/2" clearance over factory, yet it holds 7-7.5 quarts without filter at a very reasonable price, is a no brainer for almost any application.
|
|
Specializing in dyno services, engine building, and cylinder head porting
rbjracing.com Phone Number 518-915-3203 |
|
jcisworthy
AMC Addicted Joined: Jul/23/2009 Location: North Carolina Status: Offline Points: 2805 |
Post Options
Thanks(1)
|
My pan next to a Crown aftermarket pan. The new Morose would be similar to my pan with a rear drain.
|
|
Specializing in dyno services, engine building, and cylinder head porting
rbjracing.com Phone Number 518-915-3203 |
|
purple72Gremlin
AMC Addicted Charter Member Joined: Jul/01/2007 Location: Illinois Status: Offline Points: 16614 |
Post Options
Thanks(0)
|
Id buy one
|
|
BrotherBamc
Supporter of TheAMCForum Joined: Jan/22/2009 Location: Lewiston Status: Offline Points: 2248 |
Post Options
Thanks(0)
|
I'm in also..
|
|
Rebel Machine
AMC Addicted Joined: Jul/03/2007 Location: Western Il Status: Offline Points: 5121 |
Post Options
Thanks(0)
|
Just a suggestion..... perhaps the entire pan could be a bit deeper for those who might want to run a windage tray. I did one a while back and it worked really nicely. No clearance problems with the engine cradle. -Steve- |
|
jcisworthy
AMC Addicted Joined: Jul/23/2009 Location: North Carolina Status: Offline Points: 2805 |
Post Options
Thanks(0)
|
Ill mention it, thanks for the input
|
|
Specializing in dyno services, engine building, and cylinder head porting
rbjracing.com Phone Number 518-915-3203 |
|
mixed up
AMC Addicted Joined: Jun/16/2015 Location: Monroe mich Status: Offline Points: 2178 |
Post Options
Thanks(1)
|
if the price is under mildon and it clears speed bumps we have a winner im in
|
|
69 amx 290 auto
65 220 290 4spd 80 ford fairmont |
|
jcisworthy
AMC Addicted Joined: Jul/23/2009 Location: North Carolina Status: Offline Points: 2805 |
Post Options
Thanks(1)
|
The pan I pictured is 1/2" deeper than factory and the new Moroso will be similar or factory depth.
The extra capacity will come from the wider more square bottom. The price point looks like it will be within 25-50 dollars of the Crown stock replacement or similar currently available.
|
|
Specializing in dyno services, engine building, and cylinder head porting
rbjracing.com Phone Number 518-915-3203 |
|
mbwicz
Supporter of TheAMCForum Joined: Feb/20/2019 Location: Buffalo, NY Status: Offline Points: 2001 |
Post Options
Thanks(0)
|
I'd be interested as well.
Mike |
|
1970 AMX, one step forward, one step back. Both steps cost time and money.
|
|
bbgjc
AMC Addicted Joined: Nov/24/2009 Location: No.VA Status: Offline Points: 1665 |
Post Options
Thanks(0)
|
Good idea for the stock look. Just hope it stays within that price range.
|
|
Post Reply | Page 123 5> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |