Rolling my own rear disc brakes - 61 American

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I have a 1/4" thick bracket I just need to test fit now! I had to make some changes to the CAD drawing due to drilling restrictions. The final product may need some slight filing of the holes to fit, I hop to find out later this week. I might move the mount to the end of the axle instead of behind the flange. That will greatly reduce the thickness of the spacer needed to center the caliper. 

I've also got a front brake bracket that will use 1999-2010 Honda Accord calipers and 11.1" rotors. Just have to test fit it before making it available. 

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
farna Members Profile Send Private Message Find Members Posts Add to Buddy List Supporter of TheAMCForum Moderator Lost Dealership Project Joined: Jul/08/2007 Location: South Carolina Status: Offline Points: 19676	Post Options Post Reply Quote farna Report Post Thanks(0) Quote Reply Posted: Apr/15/2024 at 2:41pm
	I have a 1/4" thick bracket I just need to test fit now! I had to make some changes to the CAD drawing due to drilling restrictions. The final product may need some slight filing of the holes to fit, I hop to find out later this week. I might move the mount to the end of the axle instead of behind the flange. That will greatly reduce the thickness of the spacer needed to center the caliper. I've also got a front brake bracket that will use 1999-2010 Honda Accord calipers and 11.1" rotors. Just have to test fit it before making it available.
	Frank Swygert