Your donations help keep this valuable resource free and growing. Thank you.
|
AFR Heads |
Post Reply |
Author | |
Lime Green 70
AMC Apprentice Joined: Dec/01/2017 Location: pa Status: Offline Points: 74 |
Post Options
Thanks(0)
Posted: Aug/29/2022 at 8:25am |
Anyone have any info on this?
|
|
PROSTOCKTOM
Supporter of TheAMCForum Joined: Jun/20/2010 Location: Indiana Status: Offline Points: 2427 |
Post Options
Thanks(0)
|
I've never seen or heard of AFR having any intent on producing heads for an AMC engine.
Give them a call 877-892-8844 and then you'll know for sure. Tom
|
|
Molnar Technologies Full Service Dealer - Crankshafts & Connecting Rods
1969 AMC Rambler Rouge Race Car 1974 AMC Hornet Hatchback, Wally Booth Outlaw Nostalgic Pro Stock Race Car Project |
|
Javelin_GT
AMC Addicted Joined: Feb/15/2008 Location: Colorado Status: Offline Points: 1066 |
Post Options
Thanks(0)
|
This was on Facebook last week. Been Speaking to AFR Rep and using HLR/Edelbrock templates to produce new AMC Raised Intake Head that will have 200 cc High velocity Intake Runner. (Cast to be enable to port to approx 235 cc Up to 2.150-2.250 cantered intake valve(Will allow unshrouding at lower lift right through to max lift create swirl into chamber) 1.625 exhaust 300+ unported cfm soon Will come with extra 4 head Bolts 51cc Chamber(Closed Chamber, Better quench More scope for chamber design as per HLR head) to suit Iron Block and Using Modified 1.6-1.7 Yella Terra Shaft Rockers. Project Will be viable with 100 sets ordered. PS: Will still be able to run 2.02 In and 1.6 ex for street application Suitable for 4.08-4.250 |
|
1982AMCConcord
AMC Addicted Joined: Jul/13/2012 Location: Kenosha, WI Status: Offline Points: 1286 |
Post Options
Thanks(0)
|
That's my friend Gregory Stockill in Australia. I can also confirm that he has been in talks with AFR to make a limited run batch of aluminum AMC cylinder heads. He reached out to them due to the countless delays Edelbrock has with their AMC products.
|
|
jpnjim
AMC Addicted Joined: Nov/25/2007 Location: New England Status: Offline Points: 2752 |
Post Options
Thanks(0)
|
AFR making AMC heads would be fantastic!
Was there any mention of how close they are to having enough people to preorder the 100 sets? Thanks.
|
|
71 P-code 4spd Javelin/AMX
some Jeeps and some Fords |
|
Down & Dirty Dan
AMC Apprentice Joined: Aug/09/2019 Location: Battleground WA Status: Offline Points: 113 |
Post Options
Thanks(0)
|
I just talked to Air Flow Research at SEMA and asked them about this roomer. He told me there was a LOT of other things in development before some thing like that would ever come to consideration. But on a positive side, he did talk to me, and he did take my card. And he knows there is a SMALL market for that.
Dan:
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |