Your donations help keep this valuable resource free and growing. Thank you.
|
Indy manifold FI |
Post Reply |
Author | |
Babycakes
AMC Apprentice Joined: Feb/24/2010 Location: Henderson, Nv Status: Offline Points: 145 |
Post Options
Thanks(0)
Posted: Oct/20/2021 at 1:02am |
Is it necessary to install weld in injector bungs or can the manifold just be drilled?
Kind regards, Coop
|
|
mbwicz
Supporter of TheAMCForum Joined: Feb/20/2019 Location: Buffalo, NY Status: Offline Points: 2001 |
Post Options
Thanks(0)
|
It would depend if the o-rings on the injectors seal properly. I am pretty sure that the holes are stepped in the Edelbrock setup I'm using. So it depends if there is enough aluminum to get the injectors to seal.
My guess is that you will need to weld bungs into the manifold. Mike |
|
1970 AMX, one step forward, one step back. Both steps cost time and money.
|
|
WesternRed
AMC Addicted Joined: Aug/03/2010 Location: Australia Status: Offline Points: 5808 |
Post Options
Thanks(0)
|
There appears to be injector bosses cast into the Indy intake, so you should just need to drill the appropriate holes:
|
|
I've finally given up drinking for good...........now I only drink for evil.
|
|
acm
AMC Apprentice Joined: Jun/26/2011 Location: San Antonio Status: Offline Points: 85 |
Post Options
Thanks(1)
|
There's no need to weld bungs onto the Indy intake. Just machine the bosses that are there already. I
have a couple Indy intakes that are modified for EFI & the only
welding that had to be done was to secure the fuel rail on a set up I
bought (see pic). My other intake is still being machines but didn't
require any welding. |
|
acm
|
|
Babycakes
AMC Apprentice Joined: Feb/24/2010 Location: Henderson, Nv Status: Offline Points: 145 |
Post Options
Thanks(0)
|
Thank you
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |