Your donations help keep this valuable resource free and growing. Thank you.
|
Flat head combustion chamber |
Post Reply | Page <1 91011 |
Author | |
farna
Supporter of TheAMCForum Moderator Lost Dealership Project Joined: Jul/08/2007 Location: South Carolina Status: Offline Points: 19676 |
Post Options
Thanks(0)
|
The flat head cam is different from the OHV. Duration is more on the flatty (248 degrees vs 244). Timing is slightly different -- intake opens 10* BTDC on flatty, 12.5* BTDC on OHV, Closes 58* ABDC/51.5* ABDC. Exhaust opens 49* BBDC/53.5* BBDC (flatty/OHV), closes 19* ATDC/10* ATDC. Lift on the cam lobe is way more on the flatty since it doesn't have rocker arms. Rockers are 1.5:1 ratio on the OHV. The cams will physically interchange though. It might be possible to use a flatty cam to grind a better OHV cam due to the bigger lobe, but you couldn't use an OHV cam in a flat head.
|
|
Frank Swygert
|
|
Post Reply | Page <1 91011 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |