Your donations help keep this valuable resource free and growing. Thank you.
|
valve adjustment |
Post Reply |
Author | |
fts1966
AMC Apprentice Joined: Jun/02/2018 Location: Kansas city MO Status: Offline Points: 123 |
Post Options
Thanks(0)
Posted: Nov/24/2020 at 9:15pm |
1969 rambler 233 six, okay getting ready to replace the valve seals this weekend and new valve cover gasket. i want to adjust the valves while im in there. were do i find the specs or the clearances. also what size thread are the spark plugs so i can put air in to hold up the valves.
|
|
Heavy 488
AMC Addicted Joined: Apr/27/2019 Location: In the Status: Offline Points: 3557 |
Post Options
Thanks(1)
|
plugs should be standard 14mmX1.25 mm pitch
|
|
tyrodtom
AMC Addicted Joined: Sep/14/2007 Location: Virginia Status: Offline Points: 6214 |
Post Options
Thanks(1)
|
They're hydraulic lifters, you don't adjust them like a SBC.
You torque the rocker arm shaft stands to spec and that's it.
|
|
66 American SW, 66 American 2dr, 82 J10, 70 Hornet, Pound, Va.
|
|
fts1966
AMC Apprentice Joined: Jun/02/2018 Location: Kansas city MO Status: Offline Points: 123 |
Post Options
Thanks(0)
|
what is the torque spec on the rockers. this is my first one of these working on the engine inside. |
|
tyrodtom
AMC Addicted Joined: Sep/14/2007 Location: Virginia Status: Offline Points: 6214 |
Post Options
Thanks(1)
|
It says 20-23 ft-lbs in my 66 TSM, 69 would probably be the same.
|
|
66 American SW, 66 American 2dr, 82 J10, 70 Hornet, Pound, Va.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |