Your donations help keep this valuable resource free and growing. Thank you.
|
Gen 3 v8 Lifter Bank Angle? |
Post Reply | Page 12> |
Author | |
amx600rr
Supporter of TheAMCForum Joined: Jan/26/2014 Location: Florida Status: Offline Points: 420 |
Post Options
Thanks(0)
Posted: Mar/04/2021 at 1:47pm |
Talking to a Machinist about installing lifter bore sleeves. He is asking what the Gen 3 401 lifter bank angle is. Any builders know this spec? Thanks.
|
|
Ken_Parkman
AMC Addicted Joined: Jun/04/2009 Location: Ontario Status: Offline Points: 1815 |
Post Options
Thanks(0)
|
They are 45 degrees, parallel to the cylinder bores
|
|
amx600rr
Supporter of TheAMCForum Joined: Jan/26/2014 Location: Florida Status: Offline Points: 420 |
Post Options
Thanks(0)
|
Thank You Sir.
|
|
Steve_P
AMC Addicted Charter Member Joined: Jun/28/2007 Status: Offline Points: 3760 |
Post Options
Thanks(0)
|
Does any 90* engine not have the lifter bores at 90*?
|
|
Trader
AMC Addicted Joined: May/15/2018 Location: Ontario Status: Offline Points: 6762 |
Post Options
Thanks(0)
|
https://www.enginebuildermag.com/2009/04/chrysler-a-block-lifter-bank-angles/
Sounds like you have a diligent machinist.
|
|
Hurst390
AMC Addicted Joined: Apr/20/2008 Location: secret Status: Offline Points: 5752 |
Post Options
Thanks(0)
|
|
|
SC/Hurst Rambler
11.62 120 100% Street Legal |
|
Hurst390
AMC Addicted Joined: Apr/20/2008 Location: secret Status: Offline Points: 5752 |
Post Options
Thanks(0)
|
|
|
SC/Hurst Rambler
11.62 120 100% Street Legal |
|
Ken_Parkman
AMC Addicted Joined: Jun/04/2009 Location: Ontario Status: Offline Points: 1815 |
Post Options
Thanks(0)
|
Remember first time I saw that on the SBM, just shocked how stupid it looked. Years later learned it was a result of the weird valve angle combinations Chrysler was messing with in the 50's like the original A engine that had the intake rocker reversed and the older hemi stuff.
Some engines even have a different angle intake to exhaust.
|
|
6PakBee
Supporter of TheAMCForum Charter Member Joined: Jul/01/2007 Location: North Dakota Status: Offline Points: 5454 |
Post Options
Thanks(0)
|
Yup. When the A series smallblock was introduced in '56 it was based on the first generation Hemi block that required that weird lifter bore angle. Why Mopar never changed it is a mystery as it survived through the LA's and Magnum engines even though by then it wasn't needed.
|
|
Roger Gazur
1969 'B' Scheme SC/Rambler 1970 RWB 4-spd Machine 1970 Sonic Silver auto AMX All project cars. Forum Cockroach |
|
farna
Supporter of TheAMCForum Moderator Lost Dealership Project Joined: Jul/08/2007 Location: South Carolina Status: Offline Points: 19611 |
Post Options
Thanks(0)
|
As long as the lifter itself is perpendicular to the camshaft the lifter bore angle really doesn't matter. It will affect the rest of the rocker/pushrod geometry of course, but as long as that is correct there technically shouldn't be a problem -- at least not for a stock engine. High rpm operation (sustained over 4000 rpm) might make more of a difference though. The wider the angle the more room you have to put things, of course.
|
|
Frank Swygert
|
|
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |