Your donations help keep this valuable resource free and growing. Thank you.
|
68 AMX Touring Build |
Post Reply | Page 123 8> |
Author | |
NorCalAMX
AMC Apprentice Joined: Apr/06/2021 Location: Cottonwood, Ca Status: Offline Points: 123 |
Post Options
Thanks(0)
Posted: Jan/12/2022 at 3:18pm |
I thought I would share the project that I'm working on. I am putting this car together for my Father as a weekend trip car with the possibility of a lil' auto cross thrown in the mix. The car is a 68 AMX 390, 4 speed. It appears to be a very early production car, perhaps one from the first run of 50. The vin ends in 0043.The vin tag is in engine compartment on rt side spring tower. AMX dash plaque is located on the glove box as well. At some point someone robbed the AMX plaque from the dash that was below the rally pac gauges. Overall it is a really solid start for what we want to build. All stock parts that are removed will be stored in a crate... just in case. Current plans for the car are: Edelbrock Pro Flow 4 fuel injection TKX 5 speed Control Freak Front clip 17x8 wheels Wilwood brakes Procar seats Dapper headlights Sequential LED taillights Here are a few pictures of the car. Edited by NorCalAMX - Jan/12/2022 at 3:21pm |
|
BU1
AMC Addicted Joined: Aug/11/2016 Location: MN Status: Online Points: 2011 |
Post Options
Thanks(0)
|
That is a great looking AMX! Post the info from the drivers door tag and the production date can be narrowed down.
|
|
AMO #2726
#1 1968 AMX Rally Green 343 Z code 4spd since 1975 #02642 #2 1968 AMX Rally Green 290 N code 4spd since 2019 #02959 |
|
troutwilly
AMC Addicted Joined: Sep/14/2007 Location: Carriere, MS Status: Offline Points: 992 |
Post Options
Thanks(0)
|
What are you leaning towards in 17" wheels? That'll be one of my down the road expenditures.
|
|
Bill O.
70 AMX |
|
NorCalAMX
AMC Apprentice Joined: Apr/06/2021 Location: Cottonwood, Ca Status: Offline Points: 123 |
Post Options
Thanks(0)
|
I'll snap a pic of the door tag first chance I get.
|
|
NorCalAMX
AMC Apprentice Joined: Apr/06/2021 Location: Cottonwood, Ca Status: Offline Points: 123 |
Post Options
Thanks(1)
|
My dad really likes the current vintage Cragar SS wheels that are on the car. We may just upsize to the 17x8 Cragar SS 61 wheels with 245x45ZRx17 tires. |
|
bcsideshow
Supporter of TheAMCForum Joined: May/19/2010 Location: Kenosha Status: Offline Points: 1228 |
Post Options
Thanks(0)
|
Nice car! I have an early build white/red interior AMX. I don't think the early cars had two dash emblems. it started out on the glovebox and then moved to the center dash. Quite certain on non rally packs. Rally pack may be different. I am sure the experts can chime in.
|
|
1969 SCRambler "B"
1970 AMX 390 Auto 1968 AMX 390 Auto 1970 Rebel Machine Project 1969 AMX 390 4SPD Project 1969 AMX 390 Auto Project 1969 Javelin 390 project 1997 Cherokee lifted 1998 TJ Lifted |
|
BU1
AMC Addicted Joined: Aug/11/2016 Location: MN Status: Online Points: 2011 |
Post Options
Thanks(0)
|
Dash plaque facts only. No urban legends or other misinformation.
Edited by BU1 - Jan/13/2022 at 4:40pm |
|
AMO #2726
#1 1968 AMX Rally Green 343 Z code 4spd since 1975 #02642 #2 1968 AMX Rally Green 290 N code 4spd since 2019 #02959 |
|
NorCalAMX
AMC Apprentice Joined: Apr/06/2021 Location: Cottonwood, Ca Status: Offline Points: 123 |
Post Options
Thanks(0)
|
Next up..... Serpentine accessory drive system.
With this setup we get some automatic upgrades Alternator to a 140 amp Power steering pump is upgraded to a GM type 2 with remote reservoir Sanden 7B10 AC compressor for the eventual AC install
I felt that the satin black anodized system was the cleanest
looking...... But the old man wants shiny so we went with clear ceramic
coated polished aluminum for long lasting shine. Edited by NorCalAMX - Jan/14/2022 at 9:23am |
|
troutwilly
AMC Addicted Joined: Sep/14/2007 Location: Carriere, MS Status: Offline Points: 992 |
Post Options
Thanks(0)
|
X2 on the Cragar SS. Its what's been on mine forever and just can't see it any other way.
|
|
Bill O.
70 AMX |
|
troutwilly
AMC Addicted Joined: Sep/14/2007 Location: Carriere, MS Status: Offline Points: 992 |
Post Options
Thanks(0)
|
That serpentine system is the CVF unit. I went with the March. What, if any, modifications have you made or are planning to make to the cooling system (fan) to clear the pulleys?
|
|
Bill O.
70 AMX |
|
Post Reply | Page 123 8> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |