Your donations help keep this valuable resource free and growing. Thank you.
|
Victor Jr. Installation |
Post Reply |
Author | |
Rebel Machine
AMC Addicted Joined: Jul/03/2007 Location: Western Il Status: Offline Points: 5122 |
Post Options
Thanks(0)
Posted: May/06/2021 at 8:00pm |
Swapping out the Performer RPM Air-Gap dual plane intake for the Victor Jr. single plane in my supercharged AMX. Hoping for more top end power. Made an oil baffle for the underside. The Performer Air-Gap comes with a plate that doesn't stop much of anything. My Victor Jr. didn't come with one at all. Top of baffle. Installed. When I bolted the intake on I found out I had to grind the outside end of my wrench to tighten the front-most passenger side bolt. It's really close to to the water passage casting. Allen head bolts might work better. All snugged down. |
|
troutwilly
AMC Addicted Joined: Sep/14/2007 Location: Carriere, MS Status: Offline Points: 992 |
Post Options
Thanks(0)
|
Very nice. I will hopefully soon be doing the same (Victor Jr. and throttle body).
|
|
Bill O.
70 AMX |
|
crossramrambler
Supporter of TheAMCForum Joined: Dec/13/2008 Location: Reno,Nv Status: Offline Points: 494 |
Post Options
Thanks(0)
|
Sure would have been nice if you would have had that on when you Dynoed it. You will have to let us know how it feels............Jim,
|
|
Rebel Machine
AMC Addicted Joined: Jul/03/2007 Location: Western Il Status: Offline Points: 5122 |
Post Options
Thanks(0)
|
I've got 1/8th and 1/4 mile numbers with the Performer. Will compare the numbers with this intake. The Victor Jr. doesn't have a port for connecting the boost referenced fuel pressure regulator so I'll probably have to tap an NPT thread into it. -Steve-
|
|
70amxvegas
AMC Addicted Joined: Apr/26/2009 Location: Lost Wages Status: Offline Points: 1793 |
Post Options
Thanks(0)
|
I was going swap like you, but can not find a 70 and later new victor jr. Anywhere . Looks like a long wait for one too.
|
|
troutwilly
AMC Addicted Joined: Sep/14/2007 Location: Carriere, MS Status: Offline Points: 992 |
Post Options
Thanks(0)
|
I've seen where the EFI Victor Jr. is readily available but the non-EFI has a about a 3 month lead time. Is there any difference between the two other than the holes for the injectors? If not, could the injector holes be plugged with something temporary for a future swap to EFI?
|
|
Bill O.
70 AMX |
|
iapexl8r
AMC Addicted Joined: Apr/13/2008 Location: north idaho Status: Offline Points: 639 |
Post Options
Thanks(0)
|
Do they make this intake for the short deck 69 motor?
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |