Your donations help keep this valuable resource free and growing. Thank you.
|
Rambler American Electric Wiper Kits |
Post Reply |
Author | |
hoosieramc
AMC Addicted Joined: Jul/03/2007 Location: Indiana Status: Offline Points: 1233 |
Post Options
Thanks(0)
Posted: Jul/22/2007 at 1:58pm |
Maybe it's time for someone to make an electric wiper kit for the 64-69 Rambler Americans. One just sold on E-bay for $380. One of the European sites talks about using a Ford Escort set up. Filed that one under urban legend. Has anyone ever done this?
|
|
KermitDRambler
AMC Addicted Joined: Jul/06/2007 Location: Cincinnati, OH Status: Offline Points: 2579 |
Post Options
Thanks(0)
|
The person who wrote up the Escort conversion did actually do it. It seems to me that someone got a little bit bid happy. I usually see them advertised for less than $200. If you're after a set up, I'd place a want ad in the AMC Rambler Club's ads. I'm sure you can do better than this. Also, the Kenosha show is this weekend. If you can make it there, you will most likely find these parts. Matt |
|
farna
Supporter of TheAMCForum Moderator Lost Dealership Project Joined: Jul/08/2007 Location: South Carolina Status: Offline Points: 19677 |
Post Options
Thanks(0)
|
I have a Ford motor in my 63 Classic, but because the motor fits differently than the Hornet, American, and 67+ big car the European guy has installed in (it's on http://amccf.laatikko.org/main.html in the tech section, first article) It was a bit harder. I had to make a new mounting plate and bend it just right. It works well, but obviously isn't factory.
|
|
Frank Swygert
|
|
purple72Gremlin
AMC Addicted Charter Member Joined: Jul/01/2007 Location: Illinois Status: Offline Points: 16611 |
Post Options
Thanks(0)
|
1973-up AMC's have motorcraft wiper motors........
|
|
Wrambler
AMC Addicted Joined: Jul/02/2007 Location: West Virginia Status: Offline Points: 4199 |
Post Options
Thanks(0)
|
yeah, but they don't work on the Americans!
been there tried that.
I used a freebie XJ motor on mine and it looks factory stock. It's not an easy swap though. I had to use an electric American mounting plate and rework the mounting bosses on the XJ motor to allow them to slide thru the mount plate some. Then it bolted right up.
To get the arm right I took the vacuum arm and slotted it's hole and straightened it out to clear the electric mount plate.
It actualy works near perfect in sweep and fit.
Unfortuneatly if you don't have the electric mount plate and some time to debug it, well, ;lets say it is not a true "bolt in"...
|
|
Wrambler
69 AMC Rambler 4.0L, 5 speed 2015 Grand Cherokee Limited 2019 Chrysler 300 |
|
Schwalls
AMC Apprentice Joined: Sep/08/2007 Location: Des Moines, IA Status: Offline Points: 233 |
Post Options
Thanks(0)
|
I recently bought a 69 American with vac wipers. I want to change these out for the electric soon as this will be a daily driver for me. I read the info about the Ford swap and may try that. I will have to get a switch but thats no big deal either. Wrambler, do youhave any pics of your setup? Thanks,
Scott |
|
Scott
64 American Convertible 360 5sp http://www.schwallers.com/AMCpage.htm |
|
Wrambler
AMC Addicted Joined: Jul/02/2007 Location: West Virginia Status: Offline Points: 4199 |
Post Options
Thanks(0)
|
Sorry, I don't have anything of the actual install or mods needed to do it.
A general engine compartment shot can be found at Photobucket by searching Wrambler_242. It's under the sub album. I haven't done any updating of photos lately.
I've not been doing much car stuff.
|
|
Wrambler
69 AMC Rambler 4.0L, 5 speed 2015 Grand Cherokee Limited 2019 Chrysler 300 |
|
sidewinder
Moderator Group Joined: Oct/07/2007 Location: Niagara Falls, Status: Offline Points: 6665 |
Post Options
Thanks(0)
|
Has anyone ever tried to repair an electric wiper motor? I took mine off so I could restore it and I'm not sure if I messed it up or not. It worked just fine before.
I removed it.....sandblasted it and repainted. The problem is that I think a little glass beading got inside at the wire hole and I may have blown off the fabric insulation on the wires passing through the hole into the motor. I tried to bench test it but noting workrd and I'm not sure how to do that the right way...( 4 wires ??) Anyone that can help???
|
|
Chuck Page ,AKA Sidewinder
1968 "BLACK CHERRY" Javelin Previous owner of 2013 Heritage Cup winner 1970 BBO AMX |
|
sidewinder
Moderator Group Joined: Oct/07/2007 Location: Niagara Falls, Status: Offline Points: 6665 |
Post Options
Thanks(0)
|
Answering my own post....LOL.. I got the wiper motor humming again! A little help from Doug at APD...and I broke down and got out the shop books....Redid the wire insulation....put shrink tubing on...hooked up the RIGHT wires....and away it went....Good thing because ...Doug doesn't have any......!
|
|
Chuck Page ,AKA Sidewinder
1968 "BLACK CHERRY" Javelin Previous owner of 2013 Heritage Cup winner 1970 BBO AMX |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |