Product Announcements - AMC block hone/bore plates in stock

Print Page | Close Window

AMC block hone/bore plates in stock

Printed From: TheAMCForum.com
Category: The Trading Post: Sale, wanted, vendors,shipping
Forum Name: Product Announcements
Forum Description: This section is for vendors or members who offer products or services. VENDORS, Please post here and not in the general tech forums.
URL: https://theamcforum.com/forum/forum_posts.asp?TID=99318
Printed Date: Apr/23/2024 at 9:55am
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com

Topic: AMC block hone/bore plates in stock

Posted By: 74Bubblefender
Subject: AMC block hone/bore plates in stock
Date Posted: Apr/02/2019 at 9:51am

These seem to be seasonal parts for us. We have 20 of these in stock right now ready to ship.

1.5" thick T6 aluminum and 4.250 bore size on this block/hone plate. Plate also can be used as a jog to drill the "extra" compression head bolts (size is 5/16 hole for 3/8 bolts). Drill and tap bushings come with each plate

-------------
We are just about to forge new AMC V8 crankshafts.. please check here
http://www.bulltear.com/forums/showthread.php?19564

Replies:

Posted By: 74Bubblefender
Date Posted: Aug/29/2019 at 9:36am

http://www.bulltear.com/catalog/product_info.php?products_id=279&osCsid=krp0ugckl7uof058j4as75fnt4" rel="nofollow - http://www.bulltear.com/catalog/product_info.php?products_id=279&osCsid=krp0ugckl7uof058j4as75fnt4

Above link for the hone plates.

We also are doing HRC gears on all AMC timing cover orders when ordered with a gear set.

-------------
We are just about to forge new AMC V8 crankshafts.. please check here
http://www.bulltear.com/forums/showthread.php?19564

Posted By: Down & Dirty Dan
Date Posted: Sep/30/2019 at 5:55pm

Can I ask you how much the block plats are on this part of the forum? Also, I am looking to go big on a block,(taller). But I need some one that can make a plat,(Like a torque plate) only it would go on top of the block with 8 shelves holding it in place and the head bolts going through the plate and into the block. Match like a Caterpillar motor has. And the plate being big enuff to the outside of the block so the extra head bolt could go into the plate with a 1/2 bolt. So the plate would have to be belit still and at lest thick enuff to hold the threads of the head bolt. Would you be able to make that for me, and how much? Also on your cranks, Would you entertain making the Mains thrust bearing 426 Hemi size. Then we can cut #3 main narrower in the block and use 426 Hemi Cevit H prifix bearings. Bulletproof mains.

Thank's for your time,

Dan

Posted By: PROSTOCKTOM
Date Posted: Sep/30/2019 at 6:01pm

Down & Dirty Dan wrote:

Can I ask you how much the block plats are on this part of the forum? Also, I am looking to go big on a block,(taller). But I need some one that can make a plat,(Like a torque plate) only it would go on top of the block with 8 shelves holding it in place and the head bolts going through the plate and into the block. Match like a Caterpillar motor has. And the plate being big enuff to the outside of the block so the extra head bolt could go into the plate with a 1/2 bolt. So the plate would have to be belit still and at lest thick enuff to hold the threads of the head bolt. Would you be able to make that for me, and how much? Also on your cranks, Would you entertain making the Mains thrust bearing 426 Hemi size. Then we can cut #3 main narrower in the block and use 426 Hemi Cevit H prifix bearings. Bulletproof mains.

Thank's for your time,

Dan

Dan,

If you click on the above link you'll see that they want $445 for the plate.

Tom

-------------
Molnar Technologies Full Service Dealer - Crankshafts & Connecting Rods

1969 AMC Rambler Rouge Race Car
1974 AMC Hornet Hatchback, Wally Booth Outlaw Nostalgic Pro Stock Race Car Project

Posted By: Down & Dirty Dan
Date Posted: Sep/30/2019 at 6:05pm

Thanks Tom.

Dan: