OEM Tools Stud Extractor
Printed From: TheAMCForum.com
Category: The Garage
Forum Name: Tool Time tool review and eval area
Forum Description: Tool reviews, evaluations and tips only please.
URL: https://theamcforum.com/forum/forum_posts.asp?TID=96820
Printed Date: Apr/19/2024 at 12:45pm
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com
Topic: OEM Tools Stud Extractor
Posted By: CamJam
Subject: OEM Tools Stud Extractor
Date Posted: Oct/13/2018 at 8:00am
|
I broke the head off one of my thermostat housing bolts trying to remove it. Only 3/8" of threads was left to grab on to once the housing was removed, so I did not have high hopes that this tool would work, but it did the job! https://www.amazon.com/OEMTOOLS-25218-Drive-Stud-Extractor/dp/B075LJ2LV5" rel="nofollow - OEM Tools 25218 ------------- '73 Javelin 360 (current project) '72 Baja Bronze Javelin SST '69 Big Bad Orange AMX (2018 Teague Heritage Award) SOLD  |
Replies:
Posted By: 304-dude
Date Posted: Oct/13/2018 at 8:33am
|
Ah, I have a set from NAPA. Though they are a standard height socket design. I thought the set would be single use item, but every once and a while I find a rounded head that is too difficult to grab with channel locks or a vice grip. ------------- 71 Javelin SST body 390 69 crank, 70 block & heads NASCAR SB2 rods & pistons 78 Jeep TH400 w/ 2.76 Low 50/50 Ford-AMC Suspension 79 F150 rear & 8.8 axles Ford Racing 3.25 gears & 9" /w Detroit locker |