Evaporator & AC duct removal
Printed From: TheAMCForum.com
Category: The Garage
Forum Name: Body/Interior
Forum Description: Paint, glass, interior, rust, sheetmetal goes here.
URL: https://theamcforum.com/forum/forum_posts.asp?TID=96410
Printed Date: Apr/23/2024 at 10:55am
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com
Topic: Evaporator & AC duct removal
Posted By: JohnRyd
Subject: Evaporator & AC duct removal
Date Posted: Sep/19/2018 at 7:12pm
|
I am in the process of removing the evaporator and the supply duct from my 1972 Ambassador to re-insulate. The old insulation both on the evaporator box and internal dampers and on the duct has become brittle and is crumbling. Removal of the passenger side duct and the heater box and blower was straightforward. I'm now running into problems with the evap box and drivers side duct. I tried removing the pad on top but there are three screws that are quite difficult to get to. The head is on the backside. I circled one in the picture. There is one phillips head screw also circled in the picture that secures the bracket that holds the duct. If I can remove the pad the screw to the duct should be more accessible. Likewise if I remove the duct, the backside of the screws that hold the pad would be more accessible. I have tried all kinds of wrenches, sockets and offset screwdrivers. Catch 22. Has anyone done this without removing the entire dash? Please let me know how you did it. Many thanks in advance!! Adolph John Rydzewski  ------------- Adolph John Rydzewski Newark, Delaware 1972 Ambassador 4dr Brougham, 360/2BBL/727 purchased new 1968 AMX 390/Auto 1957 Hudson Hollywood 327/Auto 1975 Cadillac Eldorado 1992 Lumina Z34 5 speed |