Piggy back fuse block terminals
Printed From: TheAMCForum.com
Category: The Garage
Forum Name: Electrical - non engine
Forum Description: Charging systems, lights, non-ignition system, it goes here.
URL: https://theamcforum.com/forum/forum_posts.asp?TID=95384
Printed Date: Apr/23/2024 at 8:54pm
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com
Topic: Piggy back fuse block terminals
Posted By: Rodney Schultz
Subject: Piggy back fuse block terminals
Date Posted: Jul/19/2018 at 8:02pm
|
Has anyone found an aftermarket compatible connector for the later model (‘78 plus?) piggy back fuse block power taps? Used on accessory power feeds; rally pak gauges, courtesy lights, tach feeds, clock feeds, etc... Most of mine are missing their locking tab. I also notice as I took a picture that they are actually different shapes with interlock grooves to prevent one from inserting into another. Rodney   ------------- '78 Gremlin... The never ending project... But we will succeed! |
Replies:
Posted By: 70 Donohue 390
Date Posted: Sep/04/2018 at 4:47pm
|
I hope someone finds a source. I came up empty even with Google ------------- 67 Rogue 290 Convert 70 BBO 390 5 Speed Javelin-under construction |
Posted By: THE MENACE
Date Posted: Sep/04/2018 at 6:31pm
|
I don't have their catalog handy right now, but you might want to check with "Del City". Or maybe "M&H electric". They make the replacement AMC wiring harness's. ------------- Former Owner of: The Craig Breedlove "AERO AMX" Still Owner: SS/AMX #9 replica (THE BIG MENACE) 70 AMX 416, EFI, Nash 5 speed 70 Javelin 401, 727 (Wife's car) 72 Gremlin Autocross Project. |
Posted By: Rodney Schultz
Date Posted: Sep/04/2018 at 9:09pm
|
No on Del City, though they did have Packard 56 connectors to match our originals. M&H has the non adhesive harness wrap in several widths. I have found “generic” GM ones that fit but without the different index keys that prevent one style/color from fitting in another slot. So I have a work around for now. Rodney ------------- '78 Gremlin... The never ending project... But we will succeed! |