Print Page | Close Window

One piece axels for a SC/Rambler

Printed From: TheAMCForum.com
Category: The Garage
Forum Name: Transmission & Drivetrain
Forum Description: If it's between the engine and wheels, it goes here
URL: https://theamcforum.com/forum/forum_posts.asp?TID=38284
Printed Date: Mar/28/2024 at 2:30pm
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com


Topic: One piece axels for a SC/Rambler
Posted By: bbojav
Subject: One piece axels for a SC/Rambler
Date Posted: Mar/30/2012 at 1:07pm

Just reading some posts about one piece axels it sounds like the old two piece axels must be sent in for measurements. Is this true in all cases or can you by axels specific to the car? Thanks in advance Ed



-------------
http://theamcforum.com/forum/uploads/769/th_CopyofphpVd9Cek_c2PM.jpg1969 SC/Rambler 34 Plymouth Streetrod 06 Daytona Charger



Replies:
Posted By: whizkidder
Date Posted: Mar/30/2012 at 2:23pm
Due to the many variations from the factory on AMC 20 axles/housings/track width/etc., and the potential that the housings have been swapped around over the past 40 years, Moser wants your axles to ensure they send you the right ones. I don't believe they will allow you to measure yours, either.

-------------
Ron Frost
marne1ancient @ gmail.com
910 nine two two 0563

"There is no limit to what a man can do, so long as he does not care a straw who gets credit for it. Charles Montague


Posted By: wcamp70
Date Posted: Apr/04/2012 at 6:32pm
I had to send them mine. No problems and quick turnaround time.


Posted By: bbojav
Date Posted: Apr/04/2012 at 7:58pm
Thanks for your comments on the axels. Mine are being sent to Moser tommorro

-------------
http://theamcforum.com/forum/uploads/769/th_CopyofphpVd9Cek_c2PM.jpg1969 SC/Rambler 34 Plymouth Streetrod 06 Daytona Charger



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.03 - http://www.webwizforums.com
Copyright ©2001-2019 Web Wiz Ltd. - https://www.webwiz.net