Print Page | Close Window

lower fender bolts for Javelin

Printed From: TheAMCForum.com
Category: The Garage
Forum Name: Body/Interior
Forum Description: Paint, glass, interior, rust, sheetmetal goes here.
URL: https://theamcforum.com/forum/forum_posts.asp?TID=105843
Printed Date: Apr/15/2024 at 11:15pm
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com


Topic: lower fender bolts for Javelin
Posted By: Alberta68
Subject: lower fender bolts for Javelin
Date Posted: May/22/2020 at 2:23pm
Car is hitting the paint booth in a couple days and they have a problem finding a lower bolt to fit the fender at rear bottom where it attaches to the rocker.
It may be that the threads are pooched as I would think they are standard thread?
Hoping someone can confirm on the bolt specs.
Thanks!



Replies:
Posted By: 304-dude
Date Posted: May/22/2020 at 2:31pm
There is a stamped steel fastener nut, that fits into place. They are hard to come by... I think 401MatadorCoupe may still have one or two..

I can look in my parts an post an image... for reference, as to search on line for an equivalent. There are a few parting out some Javelins, which may have a good fastener nut on the body.

-------------
71 Javelin SST body
390 69 crank, 70 block & heads
NASCAR SB2 rods & pistons
78 Jeep TH400 w/ 2.76 Low
50/50 Ford-AMC Suspension
79 F150 rear & 8.8 axles
Ford Racing 3.25 gears & 9" /w Detroit locker


Posted By: Steve_P
Date Posted: May/22/2020 at 3:57pm
The screw is a special "square" thread, and there is also a clip- as said. AMK reproduced the screw and I believe Amark also carries them

edit:
https://www.amarkamc.com/product.sc?productId=574&categoryId=54" rel="nofollow - https://www.amarkamc.com/product.sc?productId=574&categoryId=54


Posted By: PHAT69AMX
Date Posted: May/22/2020 at 9:51pm
Well isn't that special... Smile  Learned something today...  Thanks Steve-P

-------------


Link to a http://www.youtube.com/watch?v=MySiKQsmWxU" rel="nofollow - Short YouTube Burnout Video



Posted By: Alberta68
Date Posted: May/23/2020 at 2:22pm
Hey thanks that link to the picture showed me what I was looking for, found them !!
much appreciated 



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.03 - http://www.webwizforums.com
Copyright ©2001-2019 Web Wiz Ltd. - https://www.webwiz.net