Flywheel bolts
Printed From: TheAMCForum.com
Category: The Garage
Forum Name: Transmission & Drivetrain
Forum Description: If it's between the engine and wheels, it goes here
URL: https://theamcforum.com/forum/forum_posts.asp?TID=102364
Printed Date: Apr/23/2024 at 6:49pm
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com
Topic: Flywheel bolts
Posted By: 68-73 amx
Subject: Flywheel bolts
Date Posted: Oct/09/2019 at 10:23pm
|
My flywheel bolts are too long , could I use the star shaped spacer from a auto flex plate to give the bolts clearance ? Or just buy new 1/2 ARP long bolts ?
|
Replies:
Posted By: Steve_P
Date Posted: Oct/10/2019 at 7:00am
|
Don't use a spacer- the hub on the clutch disk uses that space. Get the correct bolts. Pontiac bolts are slightly longer than AMC but will work.
|
Posted By: amcenthusiast
Date Posted: Oct/10/2019 at 11:22am
Get familiar with all our AMC-specific vendors who are knowingly committed to 'going the extra mile' for all us other AMCers who need to buy correct parts for our less popular but otherwise excellent cars.
-see 'vendors' section right here on AMC Forum
-ever seen 'Alan Flemming's Home Page'? http://www.science.uwaterloo.ca/~afleming/" rel="nofollow - http://www.science.uwaterloo.ca/~afleming/
-------------
443 XRV8 Gremlin YouTube video: https://www.youtube.com/watch?reload=9&v=2DmFOKRuzUc
XRV8 Race Parts website: http://amcramblermarlin.1colony.com/
|
Posted By: 68-73 amx
Date Posted: Oct/10/2019 at 4:11pm
|
Today I found out my Hayes flywheel is almost 3/16 thinner at the bolt flange vs stock that is why 1 inch bolts slightly hit block .Jeep 4.0 bolts are 7/8 ordered a set today.
|
|