|
|
|
Your donations help keep this valuable resource free and growing. Thank you.
|
Parts needed for charity AMX |
Post Reply 
|
Page <1 34567> |
| Author | |
billd 
Moderator Group 
Forum Administrator Joined: Jun/27/2007 Location: Iowa Status: Offline Points: 22772 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: Sep/16/2008 at 10:21am |
|
CRAP! I saw some GOOD clean blower motors and decent seat belts that seemed to me to be 1970 style last weekend. OMG, my bad - I didn't print the list and take it with.
|
|
 |
|
|
Ram Air Rick
Supporter of TheAMCForum 
Joined: Jul/04/2007 Location: United States Status: Offline Points: 953 |
Post Options
Thanks(0)
Quote Reply
Posted: Sep/21/2008 at 8:06am |
|
Just wanted to take a minute here, to say that I heard from Rick J. yesterday,and the set of reproduction Goodyear Polyglas E-70-14 (RWL) tires ,arrived in good condition yesterday ,that Kelsey Tire generously donated for "Hannah" Charity AMX.
I also wanted to point out how quickly and selflessly, John Kelsey (owner) and his very able assistant "Peggy" were, to help this cause.
I have dealt with Kelsey Tire in the past,and from my first dealing with them,was very impressed! They know how to give their customers satisfaction,and it's through outstanding service and high quality products!(I know because my Kelsey tires have been punished and keep coming back for more
 !!!)Now,they didn't ask me to write this,it's just what I think ,and thought you should know too.
If you do have a need for reproduction tires for your project,you will not go wrong with Kelsey Tire.
Much Thanks to all the fine people at Kelsey Tire !
Sincerely,
Rich Corsello
|
|
|
|
|
badx
AMC Nut 
Charter Member Joined: Jul/01/2007 Location: Massachusettes Status: Online Points: 303 |
Post Options
Thanks(0)
Quote Reply
Posted: Sep/23/2008 at 10:51pm |
|
I would just like to say A big thanks to Rich Corsello for his efforts to get us the tired from Kelsey tire. These are awesome and will look great on the car. Thanks Rich.
I would also like to thank Eddie Stakes for his generous donation with the ram air trim, nos AMC emblem for the rear panel, stainless chin spoiler and the door moisture barriers for the car. I tried his ram air trim out tonite and they seem like with little effort they will fit nice. Thanks Eddie and we hope all is O.K after the hurricane. Rick J Edited by badx - Sep/23/2008 at 10:53pm |
|
|
badx
|
|
|
|
|
badx
AMC Nut
Charter Member Joined: Jul/01/2007 Location: Massachusettes Status: Online Points: 303 |
Post Options
Thanks(0)
Quote Reply
Posted: Sep/24/2008 at 11:15am |
|
Well, Its nice to keep recieving donations and letting the forum members no. I just recieved the new trendsetter exaust from Mike and Steve Bursaw. They are great guys and anyone needing things they sell should definately get in touch with them at Javelinreproductions@hotmail.com A big thanks for this donation just like all of them. We still need people to step up so please help however you can. Thanks Rick J
|
|
|
badx
|
|
|
|
|
farna
Supporter of TheAMCForum
Moderator Lost Dealership Project Joined: Jul/08/2007 Location: United States Status: Offline Points: 7106 |
Post Options
Thanks(0)
Quote Reply
Posted: Oct/01/2008 at 8:37pm |
|
You'll be happy to hear that the remainder of the General Fund I've been keeping for the car has been turned over to Tom then. I sent a vote out to all the committee members on this to make sure they were aware of it. I was pretty sure everyone would say to hand it over since Tom will be finishing the car. There's no longer a need for any central fund. The last thing I paid for was a token amount plus S&H for the items Eddie sent. I didn't get a reply from several members. Tom rarely returns an e-mail, but I think I knew what his vote would be (may surprise some of you, but same as mine)! As soon as I got a definite majority I sent the money to the PayPal account Tom set up. Rick had mentioned it was needed for paint supplies, but check with the local paint suppliers first!
|
|
|
Frank Swygert
American Motors Cars Magazine www.amc-mag.com |
|
|
|
|
tbenvie
AMC Nut
Joined: Jul/02/2007 Location: United States Status: Offline Points: 466 |
Post Options
Thanks(0)
Quote Reply
Posted: Oct/19/2008 at 10:04pm |
|
Here is an updated list of parts needed for the Hanna, the Charity AMX:
Under the hood: Correct 1970 log style exhaust manifold drilled for smog tubes. Smog tubes-both sides and nozzles and washers Need heat riser. Ram air parts-need everything except the “Y” duct and hood chrome parts (need over air cleaner with foam and solenoid, hood inserts) Would like a radiator with the date code J9, K9, L9, A0, B0, C0. Damaged or not, as long as the top tank is good. 7 bladed fan Correct 70 air cleaner housing with element-have snorkel and lid. Need wing nut Black heater hose to water pump Accelerator cable Accelerator cable bracket that mounts on the engine intake manifold Heater control cable Clamps for smog system hoses Smog pump fan belt High pressure power steering hose (this has the fittings on either end) Vacuum advance hard formed line Cowl weatherstrip and metal retainer and screws Radiator cap Power steering pump rebuild kit Correct battery Correct nuts for hood hinges-need 8 Dip stick Fuel line clamp at valve cover Vacuum advance assy (single diaphram) Correct distributor cap Correct coil 69-70 heater motor (68 is on the car) Windshield washer pump Windshield washer bag clips (2) Outer grill backets-lower brackets, not the ones that mount to the upper core support (have all 4 of those) Both horns Hood release linkage parts-black plastic and rod that goes through it Correct style battery Correct battery cables and starter cable One undented valve cover White and black wire looms-NOS please Date coded plug wires Correct hose clamps-all |
|
|
Thomas M. Benvie
|
|
|
|
|
tbenvie
AMC Nut
Joined: Jul/02/2007 Location: United States Status: Offline Points: 466 |
Post Options
Thanks(0)
Quote Reply
Posted: Oct/19/2008 at 10:15pm |
|
Exterior Body Needs:
All four marker lights and correct screws 2 directional light housings, one lens and 2 bulbs. I need the housings with the prongs on the back, not the wires. Here is a picture of the housing with the wire and the push in plug that we need. Left and right horns 2 small bumper bolts for ends of front bumper 2 360 emblems Clips for windshield and rear window surround stainless trim Rain gutter trim-right rear with clip Quarter window trim-left and right (chrome mounts on top of quarter panel). Also need one clip and both screws License plate light assy. Decklid-no rust only Need a 70 door, left side. Can trade a mint 68 door. Needs a windshield-tinted Need taillight housings chromed need hood trim and headlight door trim chromed Complete wheel assys-lug nuts, center caps (have retainers), trim rings. Need 4 correct wheels-can trade for the 7 inch Ford ones on the car. Correct “TS” headlights Needs retaining nuts and washers for the wiper linkage. need the linkage and parts to attach it to the motor. Correct machine screws for the headlight doors Trunk lock and retainer assy. One upper door hinge windstop and retainer Front license plate bracket |
|
|
Thomas M. Benvie
|
|
|
|
|
tbenvie
AMC Nut
Joined: Jul/02/2007 Location: United States Status: Offline Points: 466 |
Post Options
Thanks(0)
Quote Reply
Posted: Oct/19/2008 at 10:22pm |
|
Interior parts needed:
Plastic 4 speed floor hump Roof rail weatherstrip-both sides Door weather strips-both sides Welting-covers the pinch weld around the doors. Also need both plastic end caps. Armrest repaired-have 3-doesn't someone repair these? Black plastic door locks Plastic seat backs and lower side seat trim for driver's side (small version) AMX emblem for steering wheel and metal center section Handle for emergency brake-70 style Clutch and brake pedal pads Electric wiper switch assy (donated one has missing connector) One door pull-hard rubber style Complete dash crash pad Sunvisors Headliner Vinyl covers for interior windshield posts with clips and screws Dash speaker Shift handle needs to be rechromed Vinyl roof rail trim Trim around rear window-top and bottom piece and two side "J" shaped parts Plastic trim under rear quarter window with push in rear button. One seat belt buckle in black. Also need bolts. Would like them reconditioned as well. Repair clock Ashtray Glove box liner Floor pan patch panels-left and right rear Both door light switches (driver's one is a GM part) Rear view mirror assy just about every screw, nut, or bolt for the interior parts Edited by tbenvie - Oct/19/2008 at 10:28pm |
|
|
Thomas M. Benvie
|
|
|
|
|
71SC360
AMC Addicted
Charter Member Joined: Jun/29/2007 Location: Western NY Status: Offline Points: 2564 |
Post Options
Thanks(0)
Quote Reply
Posted: Oct/19/2008 at 10:25pm |
|
Tom,
AMark has these reproduction…black plastic hood release guide I Sent these parts…Windshield washer bag clips (2), Correct nuts for hood hinges-need 8, Correct coil, Correct hose clamps-all, License plate light assy. If you can't find them let me know and I will ship them again... I still plan to send these parts.....Clamps for smog system hoses, Dip stick, Correct distributor cap, Correct “TS” headlights, Cap for inflator bottle, Rain gutter trim-right rear with clip. I have them just not boxed up yet...
Is the fan you are looking for a fixed fan or a flex style?
Edited by 71SC360 - Oct/19/2008 at 10:33pm |
|
|
|
|
tbenvie
AMC Nut
Joined: Jul/02/2007 Location: United States Status: Offline Points: 466 |
Post Options
Thanks(0)
Quote Reply
Posted: Oct/19/2008 at 10:27pm |
|
Trunk area and under car parts needed:
Leaf springs and u-bolts Idler arm 4 torque link bushings Emergency brake cables-all Trunk mat Correct spatter paint 1 side marker light cover Cap for inflator bottle Trunk weatherstripping Foam rubber pieces to hold rear harness in place |
|
|
Thomas M. Benvie
|
|
|
|
|
Post Reply
|
Page <1 34567> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Click for TheAMCForum Rules
Topic Options