Your donations help keep this valuable resource free and growing. Thank you.
|
Help installing the trunk separator |
Post Reply | Page <12 |
Author | |
CamJam
Moderator Group Joined: Jan/04/2014 Location: Arizona Status: Offline Points: 6553 |
Post Options
Thanks(0)
|
Also, if the plastic trim piece has any broken tabs on the back it will flex too much when you push on it and you will have a difficult time getting the divider into the groove.
|
|
george w
Supporter of TheAMCForum Joined: Jan/27/2013 Location: New Jersey Status: Offline Points: 2899 |
Post Options
Thanks(0)
|
It helps if you pre bend the panel before putting it in. Also, the carpet along the back edge should be about 1/2" short of the actual edge of the panel. The vinyl edge binding wraps over the edge and glues to the back side of the panel. The fact that the carpet stops short creates a rear edge vinyl covered lip that's thin enough to slip into the groove in the plastic. If you have to you can secure the lower edge of the plastic trim panel to the steel ledge below using some short 1/4-20 truss head bolts and nuts. You'll see that the plastic trim panel has holes along that bottom edge that will be concealed by the carpet panel.
|
|
Long time AMC fan. Ambassador 343, AMX 390, Hornet 360, Spirit 304 and Javelin 390. All but javelin bought new.
|
|
DoughertyAMX
Supporter of TheAMCForum Joined: Sep/20/2016 Location: Washington, Ind Status: Offline Points: 519 |
Post Options
Thanks(0)
|
Does anyone have a good picture of these filler panels that go beside the wheel wells?
|
|
AMXTSY
Supporter of TheAMCForum Joined: Jul/08/2014 Location: central IL Status: Offline Points: 445 |
Post Options
Thanks(0)
|
American Parts Depot has a picture of the filler boards by themselves on their website. It's under the heading AMX Javelin Interior. Scroll down page- just above floor mats. APD #293 0909, $10.00/pr. plus mandatory shipping. Sorry, don't have photo of boards installed. Bruce
|
|
Bruce Carothers
Champaign County, Il. AMO # 9928 |
|
Post Reply | Page <12 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |