Your donations help keep this valuable resource free and growing. Thank you.
|
87 Wagoneer 4x4 issue! |
Post Reply |
Author | |
Billyzack
AMC Fan Joined: Jan/08/2019 Location: Phoenix Status: Offline Points: 4 |
Post Options
Thanks(0)
Posted: Jan/09/2019 at 11:15am |
my 87 Grand Wagoneer wont go into 4x4 mode. The switch works as does the vacuum motor that puts the transfer case in and out of 4x4 but the arm on the transfer case is stuck in 2wd mode. I tried moving it with my hand and it won’t move. I’m afraid to pry too hard on it and was wondering if anyone has had any experience with these NP229 transfer cases. I suspect lack of use has took its toll and possibly it is just stuck in 2wD but I’m not familiar with these. I removed the vacuum motor and tested it and it works fine so It’s the transfer case laver itself that’s stuck. Any help would be appreciated. thanks in advance. Billyzack from Phoenix
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |