Your donations help keep this valuable resource free and growing. Thank you.
|
OEM Tools Stud Extractor |
Post Reply |
Author | |
CamJam
Moderator Group Joined: Jan/04/2014 Location: Arizona Status: Offline Points: 6553 |
Post Options
Thanks(0)
Posted: Oct/13/2018 at 8:00am |
I broke the head off one of my thermostat housing bolts trying to remove it. Only 3/8" of threads was left to grab on to once the housing was removed, so I did not have high hopes that this tool would work, but it did the job!
OEM Tools 25218 |
|
'73 Javelin 360 (current project)
'72 Baja Bronze Javelin SST '69 Big Bad Orange AMX (2018 Teague Heritage Award) SOLD |
|
304-dude
AMC Addicted Joined: Sep/29/2008 Location: Central Illinoi Status: Offline Points: 9082 |
Post Options
Thanks(0)
|
Ah, I have a set from NAPA. Though they are a standard height socket design. I thought the set would be single use item, but every once and a while I find a rounded head that is too difficult to grab with channel locks or a vice grip.
|
|
71 Javelin SST body
390 69 crank, 70 block & heads NASCAR SB2 rods & pistons 78 Jeep TH400 w/ 2.76 Low 50/50 Ford-AMC Suspension 79 F150 rear & 8.8 axles Ford Racing 3.25 gears & 9" /w Detroit locker |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |