Your donations help keep this valuable resource free and growing. Thank you.
|
72 Stock Intake Manifold |
Post Reply | Page <12 |
Author | |
billd
Moderator Group Forum Administrator Joined: Jun/27/2007 Location: Iowa Status: Offline Points: 30894 |
Post Options
Thanks(1)
|
I have bags of new drive screws correct for AMC intakes if you decide to pull the baffle to clean and ensure no crap gets trapped above it........... a VERY sharp chisel, with a long narrow taper works to get those started up out of the hole and then I use a pair of side cutters that are also angled shallow and pinch the drive screw under the head and turn while pulling up and they come out not to badly, really. I usually end up not even distorting the baffle much, if at all.
|
|
Y2kdancr
AMC Fan Joined: Mar/18/2018 Location: Indinapolis Status: Offline Points: 6 |
Post Options
Thanks(0)
|
How much do you want for a hand full of the screws? Are they for the stock manifold or an aluminum manifold?
Thanks!!! |
|
AMXAL
AMC Nut Joined: Feb/19/2012 Location: IL. Status: Offline Points: 324 |
Post Options
Thanks(0)
|
I saw your post and am in need of 6 of the drive screws for a manifold I plan to use on my Marlin, it appears the previous owner removed the pan and broke off the drive screws.....best guess is I will have to drill those out...anyway how much of 6 screws and shipping to Il.
Thanks Al
|
|
Post Reply | Page <12 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |