Your donations help keep this valuable resource free and growing. Thank you.
|
como calibrar punterias con botadores hidraulicos? |
Post Reply |
Author | |
Pentajgj
AMC Fan Joined: Feb/06/2018 Location: MONTERREY MEXIC Status: Offline Points: 6 |
Post Options
Thanks(0)
Posted: Feb/06/2018 at 7:29pm |
Tengo una jeep wagoneer 1979 mexicana con motor 282 y cabeza de 258 amc. y tengo problemas con el ajuste de los balancines que no cortan y presionan las válvulas lo que hace que no cierren las válvulas correctamente, y he visto que en algunos amc les han puesto
RR pero cuales son los ajustables para esa cabeza de 258 que marca en que tienda, y que modelo a fin de no tener que ponerle lainas de laton en la base de los rokers de acero originales, ya no doy con bola, pues o quedan muy sueltos o demasiado apretados, QUE ALGUIEN ME AYUDE¡¡¡¡¡¡¡¡
|
|
Sonic Silver
Supporter of TheAMCForum Joined: Nov/23/2011 Location: East Tennessee Status: Offline Points: 7903 |
Post Options
Thanks(0)
|
.
|
|
Gelalthedamned
AMC Nut Joined: Nov/28/2014 Location: Athens ga Status: Offline Points: 376 |
Post Options
Thanks(0)
|
Who’s that dude that’s into Mexican heads? Is there mods to be made for a 258 head on a 282...decking or maybe just push rod lengths?
Stock rockers are non-adjustable. I had some adjustable roller rockers from harland sharpe in my last build...not sure if they’re still in production. Yella terra might have some, but I don’t know. |
|
Calamity - 73 Gremlin X zombie rod (daily driver)
|
|
Lucas660
AMC Addicted Joined: Apr/16/2012 Location: Vic, Australia Status: Offline Points: 1344 |
Post Options
Thanks(0)
|
Google translate came up with this
I have a 1979 Mexican wagoneer jeep with 282 engine and 258 amc head. and I have problems with the adjustment of the rockers that do not cut and press the valves which does not close the valves correctly, and I have seen that in some amc they have put
RR but what are the adjustable for that head of 258 that marks in which store, and which model so as not to have to put brass sheets in the base of the original steel rokers, I do not give with ball, because they are very loose or too tight, THAT SOMEONE HELPS ME¡¡¡¡¡¡¡¡ |
|
farna
Supporter of TheAMCForum Moderator Lost Dealership Project Joined: Jul/08/2007 Location: South Carolina Status: Offline Points: 19611 |
Post Options
Thanks(0)
|
Sounds like he may have some wiped/worn cam lobes...
|
|
Frank Swygert
|
|
Pentajgj
AMC Fan Joined: Feb/06/2018 Location: MONTERREY MEXIC Status: Offline Points: 6 |
Post Options
Thanks(0)
|
con respecto a las punterias los botadores arbol de levas y todo el conjunto de motor fue renovado pero las varillas de empuje son las mismas que traia pero solo tengo problema en los cilindros 1,2,y3. y por eso pienso ponerle RR ajustables y mo tener que estar poniendo lainas de aluminio debajo del balancin, ya que de no hacerlo permanece abierta la valvula y si le pongo de mas queda suelta y suena demaciado, y pensando si el roller es ajustable seria mas facil calibrar la avertura de la valvula , ero cual es ajustable y el indicado para esta cabeza amc 258 ? me dicen que lle podria quedar los de chebrolet pero son novatos como yo asi que me dirijo a ustedes los expertos, ¡¡¡ HEEEEELP ¡¡¡
|
|
purple72Gremlin
AMC Addicted Charter Member Joined: Jul/01/2007 Location: Illinois Status: Offline Points: 16591 |
Post Options
Thanks(0)
|
Or jumped time. I can't make head or tails of what you are saying. What's camshaft pullers?
|
|
Pentajgj
AMC Fan Joined: Feb/06/2018 Location: MONTERREY MEXIC Status: Offline Points: 6 |
Post Options
Thanks(0)
|
with regard to the aims of the botadores cam shaft and the whole motor was renovated but push rods are the same that brought but only I have problem in 1,2,y3 cylinders. and so I think put RR adjustable and mo have to be putting shim of aluminum under the rocker, since otherwise it is open valve and if I put in is loose and sounds way too, and thinking if the roller is adjustable would be more easy to calibrate the bird ero rtura of the valve, which is adjustable and suitable for this amc 258 head? tell me that lle could be the chebrolet but are newbies like me so I am skilled, HEEEEELP!!!!!!
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |