Your donations help keep this valuable resource free and growing. Thank you.
|
994 casting NASCAR heads |
Post Reply | Page <123 |
Author | |
dbomb
AMC Addicted Joined: Jul/22/2012 Location: new jersey Status: Offline Points: 705 |
Post Options
Thanks(0)
|
Would be ineresting to see mods done to some of these heads Maybe you fellas can snap a few pics when ya have a chance
|
|
rebuiling 73 amx need parts
|
|
Hurst390
AMC Addicted Joined: Apr/20/2008 Location: secret Status: Offline Points: 5818 |
Post Options
Thanks(0)
|
Did you ever use them?
|
|
SC/Hurst Rambler
11.62 120 100% Street Legal |
|
jcisworthy
AMC Addicted Joined: Jul/23/2009 Location: North Carolina Status: Offline Points: 2805 |
Post Options
Thanks(0)
|
Never used them.
The seats were cut for 2.1 and I think 1.78 or something big on the exhaust. The valve job was terrible, the seats were sunk so I decided to install seat inserts and use 2.1/1.65 valves. Ended up hitting water in almost every hole I cut for a seat insert I welded on them with special rod and installed seats but have not finished them because I do not trust them. There is quite a bit of core shift on the exhaust seat inserts but they would work Don't know if someone moved valves around or the castings were poor quality. There are extra bolt holes with inserts to seal the water jacket that look a little iffy. I could fix that with a press fit on a larger insert so that would not worry me All in all, they are usable if finished but questionable |
|
Specializing in dyno services, engine building, and cylinder head porting
rbjracing.com Phone Number 518-915-3203 |
|
Javelin_GT
AMC Addicted Joined: Feb/15/2008 Location: Colorado Status: Offline Points: 1066 |
Post Options
Thanks(0)
|
My set of of 993 NASCAR heads are going on a motor. Engine is currently being built. Here are the flow numbers and a couple pics. |
|
Post Reply | Page <123 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |