|
|
|
Your donations help keep this valuable resource free and growing. Thank you.
|
Alternator pulley |
Post Reply 
|
| Author | |
gremlin1945 
AMC Addicted 
Joined: May/21/2008 Location: new jersey Status: Offline Points: 781 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: Alternator pulleyPosted: Oct/10/2017 at 7:29pm |
|
I don't like the stock pulley on my GM alt. A 1/2" doesn't ride completely in the channel. The alt. shaft diameter is .670" and the total width of the pulley is .868". What would be a good deep groove replacement?
|
|
|
former NHRA #1945
former IHRA #1945 T/SA |
|
 |
|
|
gremlin1945
AMC Addicted
Joined: May/21/2008 Location: new jersey Status: Offline Points: 781 |
Post Options
Thanks(0)
Quote Reply
Posted: Oct/11/2017 at 8:17pm |
|
Hello, hello is there anybody in there?
|
|
|
former NHRA #1945
former IHRA #1945 T/SA |
|
|
|
|
Lyle
AMC Addicted
Joined: Jul/17/2014 Location: None Status: Offline Points: 772 |
Post Options
Thanks(0)
Quote Reply
Posted: Oct/14/2017 at 10:23pm |
|
Yes there are people out here but you have not provided much to respond to.
The alternator model#, application - engine, vehicle, accessories ... My first response would be; ask if the pulley is worn out and if so obtain a new one if all performance issues are good. My second response would be; depending on the alternator model, go to a local wrecker and find one with the same OD and ID that fits the belt width you are using and take it. The spacer behind the pulley can be reused from your old alternator or just use an off the shelf bushing to make a new one to get the alignment correct. If you provide more information others that have more experience may provide specific part numbers or replacement parts for your application. Hope this helps.
|
|
|
|
|
gremlin1945
AMC Addicted
Joined: May/21/2008 Location: new jersey Status: Offline Points: 781 |
Post Options
Thanks(0)
Quote Reply
Posted: Oct/14/2017 at 11:59pm |
|
I just ordered one from Summit. I wasn't sure what pulley to use because some GM type alternators have shaft diameters. Pulled the pulley off my alt. It was .670 dia. Ordered it tonight. Thanks for the reply.
|
|
|
former NHRA #1945
former IHRA #1945 T/SA |
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Click for TheAMCForum Rules
Topic Options