Your donations help keep this valuable resource free and growing. Thank you.
|
T10 front bearing retainer |
Post Reply |
Author | |
lrallen
Supporter of TheAMCForum Joined: Jul/19/2007 Location: Ohio Status: Offline Points: 343 |
Post Options
Thanks(0)
Posted: Sep/14/2017 at 6:58pm |
Where can you buy a AMC
Bearing retainer for a 1969 and earlier T10?
|
|
AMC Forever
|
|
401MATCOUPE
AMC Addicted Joined: May/20/2010 Location: Salisbury, MD Status: Offline Points: 5367 |
Post Options
Thanks(0)
|
Ross K. Peterson
68X,GoPac,343,AT,52A(1stCar) 68X,GoPac,390,4sp,52A 69X,GoPac,390,4sp,64A 70X,GoPac,390,4sp,87A,8 70X,GoPac,390,4sp,BBO,8 70 Jav SST,390,AT,BSO 74MatX,401,AT,Prototype 74MatX,401,AT |
|
FSJunkie
AMC Addicted Joined: Jan/09/2011 Location: Flagstaff, AZ Status: Offline Points: 4742 |
Post Options
Thanks(0)
|
Did you put the wrong size clutch release bearing on it and shatter the retainer like I did to my pre-1969 T-10? Been there, done that.
|
|
1955 Packard
1966 Marlin 1972 Wagoneer 1973 Ambassador 1977 Hornet 1982 Concord D/L 1984 Eagle Limited |
|
lrallen
Supporter of TheAMCForum Joined: Jul/19/2007 Location: Ohio Status: Offline Points: 343 |
Post Options
Thanks(0)
|
No, Mine is cracked. I have been reading about a steel retainer but have not found any except the APD 195.00 WOW.
|
|
AMC Forever
|
|
401MATCOUPE
AMC Addicted Joined: May/20/2010 Location: Salisbury, MD Status: Offline Points: 5367 |
Post Options
Thanks(0)
|
Larry,
I have made these out of steel for my own use and it takes a very large piece of steel and a ton of machine time......the billet starts at the size of the largest diameter......the originals were made from Cast Iron, that is why they are a bit fragile and are machined from the rough casting, very inexpensive processes. |
|
Ross K. Peterson
68X,GoPac,343,AT,52A(1stCar) 68X,GoPac,390,4sp,52A 69X,GoPac,390,4sp,64A 70X,GoPac,390,4sp,87A,8 70X,GoPac,390,4sp,BBO,8 70 Jav SST,390,AT,BSO 74MatX,401,AT,Prototype 74MatX,401,AT |
|
lrallen
Supporter of TheAMCForum Joined: Jul/19/2007 Location: Ohio Status: Offline Points: 343 |
Post Options
Thanks(0)
|
Brian at SK Speed Shop will have the 69 and earlier Front Bearing Retainer and the input shafts for a 2.23 and2.46 and other small parts for our AMC T10 by the first of the year or earlier. Thanks to Brian!
|
|
AMC Forever
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |