Your donations help keep this valuable resource free and growing. Thank you.
|
W/S washer squirter |
Post Reply |
Author | |
graewolf
AMC Apprentice Joined: Feb/25/2012 Location: Richmond Va. Status: Offline Points: 135 |
Post Options
Thanks(0)
Posted: Aug/16/2017 at 4:50pm |
Going through my '64 American wagon, going to install a factory type w/s washer in a car that didn't come with it. Got all the parts, tested works good, no leaks. Under the hood is a oval hole in the framework about where the nozzel is supposed to go, do I just center it in the hole or is there a measurement that I need to go by? Sounds simple but I only want to drill 1 hole so I want it right the first time..... Thanks in advance.....
Perk
|
|
Americans, 65 Convertible, 64-65 Wagons, 64 220 2Dr, 66 2Dr Hardtop..... They follow me home!!!
|
|
990V8
AMC Addicted Joined: Oct/07/2016 Location: Gloucestershire Status: Offline Points: 788 |
Post Options
Thanks(0)
|
The factory nozzle with my car had two jets on the left screen and one jet on the right. That's how it was made. You might want to check the jets are OK before drilling.
The fixing nut was a strange piece of bent metal with arms. Hard to tighten and undo. If yours is the same, ensure you allow room for the nut. Otherwise just centre the hole. Ivor |
|
63 Canadian Ambo 990 V8 327
74 LandRover Lightweight V8 SIII Shopping Trolley |
|
graewolf
AMC Apprentice Joined: Feb/25/2012 Location: Richmond Va. Status: Offline Points: 135 |
Post Options
Thanks(0)
|
Mine are 2 on each side, all are clear and squirt good, the speed nut threads on and off easy. So the positioning is centered in the oval shaped hole in the frame of the hood? Thanks.
Perk
|
|
Americans, 65 Convertible, 64-65 Wagons, 64 220 2Dr, 66 2Dr Hardtop..... They follow me home!!!
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |