Your donations help keep this valuable resource free and growing. Thank you.
|
Need help with rear axle |
Post Reply |
Author | |
390AMX2
AMC Apprentice Joined: Jul/04/2013 Location: Fairmont, WV Status: Offline Points: 112 |
Post Options
Thanks(0)
Posted: Nov/08/2016 at 3:51pm |
I am trying to put my rear axle back together after replacing my wheel bearings. I have been reading my 1969 TSM and I put the passenger side axle shaft in with a new outer seal and reinstalled the backing plate. I then went to the drivers side and it says that the bearing doesn't go in as far as the passenger side because there are shims to set free play. My question is: How far is the race supposed to be put in before the outer seal and backing plate are installed so I can check the free play?
|
|
1970390amx
AMC Addicted Joined: Jul/11/2008 Location: colorado Status: Offline Points: 3314 |
Post Options
Thanks(0)
|
I put the race into the housing as far as it will go. Then measure how for out it protrudes, Add shim stack a little more than it protrudes, assemble and then check axle endplay.
|
|
1970 390 4speed Bittersweet shadow mask AMX
1970 Amx missing most everything, or in a box |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |