Your donations help keep this valuable resource free and growing. Thank you.
|
What is this and what does it do!? |
Post Reply | Page <12 |
Author | |
401jim
Supporter of TheAMCForum Joined: Jan/07/2012 Location: Brunswick,Ohio Status: Offline Points: 793 |
Post Options
Thanks(0)
|
Remove the plastic plug from the valve to let the valve move both ways when you bleed the system. make sure you get all the little pieces from the valve. assemble back together in reverse order. That is what the TSM says when you bleed the brake system.....Jim
|
|
|
|
Gizmo456
AMC Apprentice Joined: Apr/15/2016 Location: Vancouver, CA Status: Offline Points: 155 |
Post Options
Thanks(0)
|
I took the valve off the car, disassembled, cleaned an reassembled. I know I was supposed to put new copper washers and O-rings but they were in such good shape I didn't feel it was necessary.
Thanks for the heads up 401jim. I rebuilt my master cylinder today and I'm hoping to get it bolted back on to the booster and bled in the next few days. I'll follow your instructions and removed the plastic plug to bleed. |
|
Post Reply | Page <12 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |