Your donations help keep this valuable resource free and growing. Thank you.
|
AMC 401 to chrysler thanny |
Post Reply |
Author | |
JDeereGn
AMC Apprentice Joined: Jul/23/2011 Location: Leesville, LA Status: Offline Points: 101 |
Post Options
Thanks(0)
Posted: Aug/26/2016 at 9:09pm |
Is there a way to adapt an AMC 401 with a 3 bolt flex plate to a 4 bolt Chrysler torque converter? thanks ralph
|
|
"All gave some - some gave all"
A veteran is someone who, at one point in his life wrote a check made payable to the United States of America for an amount of "up to and including his life". |
|
1970390amx
AMC Addicted Joined: Jul/11/2008 Location: colorado Status: Offline Points: 3314 |
Post Options
Thanks(0)
|
A three bolt flex plate tells me that the 401 came from a jeep with a turbo 400. You should be able to buy a 401 flex plate for a 70s passenger car with a 401, I would have it match balanced to the original flex plate. If your engine originally had a turbo 400 mounted to it there should be a thin spacer in the back of the crank shaft that needs to be removed for the 727 to fit.
|
|
1970 390 4speed Bittersweet shadow mask AMX
1970 Amx missing most everything, or in a box |
|
JDeereGn
AMC Apprentice Joined: Jul/23/2011 Location: Leesville, LA Status: Offline Points: 101 |
Post Options
Thanks(0)
|
Roger, you nailed it. The 401 came from a 72 waggy with a turbo 400. Yep the spacer/shim was there inside the hole in the crankshaft. I would use the turbo 400 except I already used it in another Jeep. I will look for another flex plate thanks a lot
|
|
"All gave some - some gave all"
A veteran is someone who, at one point in his life wrote a check made payable to the United States of America for an amount of "up to and including his life". |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |