Your donations help keep this valuable resource free and growing. Thank you.
|
1979 AMX Stocker update |
Post Reply | Page <1 345 |
Author | |
Pinballer
AMC Apprentice Joined: Feb/10/2016 Location: Central IL Status: Offline Points: 63 |
Post Options
Thanks(0)
|
What I had around here to put in wasn't the ideal one, it's supposedly about a 2700 stall, but the car still has carb/fuel troubles I'm fooling with and I can't test that stall out very well. On the Desktop Dyno, things seem to ET best with about a 3200-3400 converter. That fancy race piece won't be happening until Santa Clause comes to visit or Powerball pays off! Just don't have that extra thousand to spend on a -GOOD- stocker converter right now, and when I do buy one, I want it to last.
Here's my latest update: Went to a test session after installing all the new pieces, and only got one run in before troubles set in. Had a dead miss after that run back in the pits and later found a pushrod had escaped it's rocker arm. Easy enough to fix... The good news was the car STILL ran almost one full second better on the 8th from what it had before. YAY! I had installed a fuel pressure gauge during the rebuild of everything and found out the line pressure even with the stock engine mounted pump I'm still using for now was way high, like 9 lbs at idle. New regulator on order. |
|
NHRA T/SA '79 AMX
|
|
Pinballer
AMC Apprentice Joined: Feb/10/2016 Location: Central IL Status: Offline Points: 63 |
Post Options
Thanks(0)
|
The latest:
As happens in racing, sometimes an unknown condition part you install just doesn't hold up as hoped. It would appear my "gift" rebuilt low-geared 998 transmission (long story but interesting) is done for. It lasted 7 runs. However, the only money I had invested in it was for 5 qts of fluid and the gas to get it home, so it's not like I have to lick my wounds on it much. I'd like to think my freshened up "Stocker-fied" Wicked Six 258 motor now has so much horsepower the tranny couldn't handle it any more, but I don't think I can get that lie past this crowd. I was testing a couple weeks ago locally and suddenly experienced a very lazy 2-3 shift on two successive runs. Loaded up and went home right then hoping it was needing an adjustment on the bands or internal pressure was low maybe. Nope. Dropping the trans pan reveals pieces of friction material clogging the filter, so I think my unknown transmission has now become a racing commodity commonly known to most of us in this arena as "junk." With so little time left in the racing season, and nothing else around my place readily available to install to get going again, I think it would be best to regroup for a while and get this low-geared trans re-done during the down time of winter, and probably do a spare one too for good measure. The rest of the car is acting pretty good right now, so the list of improvements needed over the winter isn't a real long one. Thought about building a motor test stand too, might come in handy. Oh, don't worry, we'll be back...not quitting. |
|
NHRA T/SA '79 AMX
|
|
Class Guy
AMC Addicted Joined: Jul/02/2007 Location: Arkansas Status: Offline Points: 969 |
Post Options
Thanks(0)
|
If you feel up to the challenge, Torqueflites are one of the simpler auto transmissions to work on. I rebuilt a 727 several years ago with an eBay (Turbo Action) rebuild kit and manual after fifty years of working on stick transmissions only. I took my time, asked questions and the result is a transmission that has 30K miles on it in a mildly hopped up 360 Hornet. There's a satisfaction in being able to work on your own stuff.
|
|
Addicted to acceleration.
Owner and Admin for www.classracerinfo.com |
|
Pinballer
AMC Apprentice Joined: Feb/10/2016 Location: Central IL Status: Offline Points: 63 |
Post Options
Thanks(0)
|
Believe me, transmission school will definitely be in session here this coming winter. Lucky for me, my 80 year old step dad was an automotive instructor at a local college, and he's agreed to guide me through my first rebuild. After that, I'm being graded he says! Wow...the pressure on me never stops.
|
|
NHRA T/SA '79 AMX
|
|
Class Guy
AMC Addicted Joined: Jul/02/2007 Location: Arkansas Status: Offline Points: 969 |
Post Options
Thanks(0)
|
It's not pressure, it's an opportunity to learn. You'll do great with it.
|
|
Addicted to acceleration.
Owner and Admin for www.classracerinfo.com |
|
Post Reply | Page <1 345 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |