Your donations help keep this valuable resource free and growing. Thank you.
|
AMC 20 Carrier Swap what i do wrong |
Post Reply | Page <12 |
Author | |
amc67rogue
AMC Addicted Joined: Nov/05/2008 Location: Phx. AZ. Status: Offline Points: 1578 |
Post Options
Thanks(1)
|
8 3/4 Mopar used the same the same thrust blocks.
|
|
Keith Coggins 67Rogue X code
|
|
1970390amx
AMC Addicted Joined: Jul/11/2008 Location: colorado Status: Offline Points: 3314 |
Post Options
Thanks(1)
|
you can search for mopar 8 3/4 thrust spacer on ebay about 30$
the pin that comes with them needs to be peened over to hold them in place I just use a roll pin, put the roll pin into one half of the block and set into place in carrier. Use one axle to hold in place. set upright and place the other half onto roll pin and drive into place with punch. Edited by 1970390amx - Jun/21/2016 at 9:54pm |
|
1970 390 4speed Bittersweet shadow mask AMX
1970 Amx missing most everything, or in a box |
|
tufcj
Supporter of TheAMCForum Supporter of TheAMCForum Joined: Jul/10/2007 Location: Watkins, CO Status: Offline Points: 4088 |
Post Options
Thanks(1)
|
That is the early 2 piece "power lock". There will be a date stamped on the housing.
Bob tufcj |
|
69 AMX
74 Javelin AMX 67 Rogue If you need a tool and don't buy it... you'll eventually pay for it... and not have it. Henry Ford |
|
bob401
AMC Nut Joined: Sep/23/2009 Status: Offline Points: 263 |
Post Options
Thanks(0)
|
Thanks guys.... I ordered a button off of ebay. Hopefully all goes well.. This differential stuff is uncharted waters for me.. hopefully this is my last issue with the rear diff.
Thanks Again Bob 77 Gremlin 401
|
|
bob401
AMC Nut Joined: Sep/23/2009 Status: Offline Points: 263 |
Post Options
Thanks(0)
|
Turns out all good... That little spacer made a huge difference. Now its just driving it until the bearing burn up..
Thanks for the spot on help.. Bob 77 Gremlin 401
|
|
Post Reply | Page <12 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |