Your donations help keep this valuable resource free and growing. Thank you.
|
64 American 440 H project ( pics ) |
Post Reply | Page <1 111213 |
Author | |
DLC3062
AMC Fan Joined: Apr/18/2014 Location: Tuttle, OK Status: Offline Points: 16 |
Post Options
Thanks(0)
|
I am in the process of putting in new cent window seal there is one piece that has a steel insert that is riveted in place. The replacement seal doesn't have the steel insert, so did you glue the piece,in or did yours,have the steel?
|
|
440H
AMC Apprentice Joined: Nov/29/2008 Location: Colorado Status: Offline Points: 208 |
Post Options
Thanks(0)
|
DLC3062, hi yes mine had the metal strip also, the new stripping did not, I put tape over the holes
where the rivets were from the backside after removing them and cleaning real well. then applied the weather stripping adhesive and put the piece in place. these vent window seals are a real pain and they didn't fit real well, but they were better than nothing. And again no one else makes them. hence the high price. good luck. |
|
Brandon
|
|
mitchs66
AMC Nut Joined: Sep/22/2007 Location: Iowa Status: Offline Points: 368 |
Post Options
Thanks(0)
|
Glad to see you've made some progress
|
|
440H
AMC Apprentice Joined: Nov/29/2008 Location: Colorado Status: Offline Points: 208 |
Post Options
Thanks(0)
|
Hi guys after a long time away, I'm back in it again,trying to get a lot of little detail stuff finished and sorted out before moving ahead, mainly working on interior and trim now,will post pictures as soon as something gets finished. On a personal note I was diagnosed with acute cerebellum ataxia on Aug 28 2018, it's a rare brain disease that affects balance and coordination there is no treatment and no cure, normally a childhood disease that can be treated with antibiotics however in adults the damage is done. I am no longer employed, now on disability, so more time for the car, I'll do what I can as long as I can hopefully several more years. Thanks guys for all the help and support over the years, this was my first time getting into a car this deep, now I'll try to get it across the finish line.
|
|
Brandon
|
|
farna
Supporter of TheAMCForum Moderator Lost Dealership Project Joined: Jul/08/2007 Location: South Carolina Status: Offline Points: 19612 |
Post Options
Thanks(0)
|
Good luck to you! Fight on...
|
|
Frank Swygert
|
|
440H
AMC Apprentice Joined: Nov/29/2008 Location: Colorado Status: Offline Points: 208 |
Post Options
Thanks(0)
|
thanks Farna, will do'
Edited by 440H - Dec/31/2018 at 7:47am |
|
Brandon
|
|
LakesideRamblin
AMC Addicted Joined: Dec/21/2015 Location: So. California Status: Offline Points: 2683 |
Post Options
Thanks(0)
|
Just read this thread for the first time. Hats off to you, Brandon! Love the work you have done - fantastic. Prayers for your health.
Matt
|
|
LakesideRamblin
69 Rambler 360 73 Javelin 360 "If you could kick the person in the pants responsible for most of your trouble, you wouldn't sit for a month." T. Roosevelt |
|
440H
AMC Apprentice Joined: Nov/29/2008 Location: Colorado Status: Offline Points: 208 |
Post Options
Thanks(0)
|
thanks Matt I'll keep plugging away at it ☺
|
|
Brandon
|
|
Post Reply | Page <1 111213 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |