Help installing V8 In Hornet

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I jack up the front of the trans slightly so it is tilting backward, then drop the engine in on slight backward angle. Get the motor mount to line up and get bolts in loose. Then drop the engine very slightly, then the trans slightly so they line up together. Continue doing this very slowly and the engine and trans will mate. Make sure you get the pins between them lined up.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
rockAMX Members Profile Send Private Message Find Members Posts Add to Buddy List AMC Addicted Joined: Sep/16/2011 Location: Lethbridge AB Status: Offline Points: 985	Post Options Post Reply Quote rockAMX Report Post Thanks(0) Quote Reply Posted: Aug/27/2015 at 9:16pm
	I jack up the front of the trans slightly so it is tilting backward, then drop the engine in on slight backward angle. Get the motor mount to line up and get bolts in loose. Then drop the engine very slightly, then the trans slightly so they line up together. Continue doing this very slowly and the engine and trans will mate. Make sure you get the pins between them lined up.
	DWR 1968 AMX