Your donations help keep this valuable resource free and growing. Thank you.
|
Will 390 heads on a 360 |
Post Reply | Page <123 |
Author | |
Boris Badanov
AMC Addicted Joined: Dec/14/2013 Location: NH USA Status: Offline Points: 4210 |
Post Options
Thanks(0)
|
IMO 291C's are great for building a motor with Diesel compression.
I used em on a 1970 390. Nothing wrong with them
and the flow difference between different large valve dog leg heads is nill.
But if you are doing a rebuild with new pistons I would buy a set of turn key heads
from http://www.aeroheadracing.com/amc.html for $600 and forget about the hassles.
291C heads are better off being cashed in to a late model 360 owner that wants
to bump his or her compression up without tearing down the motor.
|
|
Gremlin Dreams
|
|
kenoshakicker
AMC Addicted Joined: Feb/14/2015 Location: PA Status: Offline Points: 525 |
Post Options
Thanks(0)
|
I got a nice set of free flow manifolds, that had no air pollution holes, just the undrilled bosses, at a local junkyard. Today I finished getting the brokenstuds out of the flanges. Do I have to reuse the exhaust flapper or can I just have the bender start the exhaust from the manifold flange? Thanks.
|
|
Slate
AMC Addicted Joined: Feb/28/2012 Location: Airyzona Status: Offline Points: 2782 |
Post Options
Thanks(0)
|
Just have him bend from the flange.
Steve
|
|
Post Reply | Page <123 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |