|
|
|
Your donations help keep this valuable resource free and growing. Thank you.
|
Need some help with remote HEI coil schematic |
Post Reply 
|
| Author | |
pityocamptes 
AMC Fan 
Joined: Mar/13/2014 Location: Hell Status: Offline Points: 18 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: Need some help with remote HEI coil schematicPosted: Apr/29/2015 at 1:31pm |
|
I really need some help with this. I originally had the coil in cap GM HEI conversion, but after having my I6 258 rebuilt I moved towards a remote GM HEI coil. This was in part due to water getting into the top of the coil (even with dust cover) and stalling out the engine. Hopefully the remote location will resolve this issue.
I picked up the Pertronix D3002 coil, direct replacement for the GM remote HEI coil, and really need some help with the pin outs. I called pertronix, but they have yet to get back with me... Anyways, if I am holding the coil in my hand, with the high voltage output tower on TOP, and the 4 pinouts below (facing me), what component goes to which pin (ie module "c", ign, +, tach)? Thanks!! PIN 1 - upper left PIN 2 - upper right PIN 3 - lower left PIN 4 - lower right
|
|
 |
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Click for TheAMCForum Rules
Topic Options