Your donations help keep this valuable resource free and growing. Thank you.
|
69 vs 70 Clutch liakage comparison |
Post Reply |
Author | |
cadipacer
AMC Nut Joined: Apr/22/2009 Location: louisville KY Status: Offline Points: 368 |
Post Options
Thanks(0)
Posted: Jan/04/2015 at 2:27pm |
Is the 69 Rebel clutch linkage ( swing pedals to fork) the same as 1970 Rebel.
I know that 73-76 Matadors are NOT the same as the 69.. Where does it make the change 70 or 71 |
|
SOLD!/SOLD!78 Pacer wagon w/ 500 cid Cadillac V8, 2:87 spool.
1956 Nash Statesman.PS,PB AC 360 rack & pin.2:56 gears. 1982 Concord 401 4 dr. incognito former-NAMDRA # 75 AMO 645,NCCA 7980 |
|
fast401
Supporter of TheAMCForum Joined: Sep/16/2008 Location: swanton, ohio Status: Offline Points: 3467 |
Post Options
Thanks(0)
|
I know the pedals from a 69 will work on a 74 Matador but I'm not sure on the linkage.
|
|
Disturbing the peace since 1970!!! AMX 19245
Facebook page - AMC Nation www.fast-401.4t.com |
|
401MATCOUPE
AMC Addicted Joined: May/20/2010 Location: Salisbury, MD Status: Offline Points: 5367 |
Post Options
Thanks(0)
|
If you are looking at part number by part number, from a 1969 set up to 1970, almost every part is different, that is not saying you can't make work,...
|
|
Ross K. Peterson
68X,GoPac,343,AT,52A(1stCar) 68X,GoPac,390,4sp,52A 69X,GoPac,390,4sp,64A 70X,GoPac,390,4sp,87A,8 70X,GoPac,390,4sp,BBO,8 70 Jav SST,390,AT,BSO 74MatX,401,AT,Prototype 74MatX,401,AT |
|
cadipacer
AMC Nut Joined: Apr/22/2009 Location: louisville KY Status: Offline Points: 368 |
Post Options
Thanks(0)
|
FAST 401: Are you saying the hanging bracket built into the dash structure will support a direct bolt in of the 69 pedals on a 73 matador.. the clutch rod extends to the right hand side of the BRAKE swing pedal. on the 69..
where as the 73 book shows clutch rod pushing through the firewall on the left side of steering column. ? I have all the parts for a 69 just have to cut a hole for the clutch rod to go into firewall on the right side of column,,,,there's a blank knock out in firewall on the left side just above the dimmer switch area( left side of column). |
|
SOLD!/SOLD!78 Pacer wagon w/ 500 cid Cadillac V8, 2:87 spool.
1956 Nash Statesman.PS,PB AC 360 rack & pin.2:56 gears. 1982 Concord 401 4 dr. incognito former-NAMDRA # 75 AMO 645,NCCA 7980 |
|
FuzzFace2
AMC Addicted Joined: Jul/05/2007 Location: Angier, N.C. Status: Offline Points: 10356 |
Post Options
Thanks(0)
|
Are you sure on that 69 going thru the firewall to the right of the column?
I ask because going by Javelins 68/69 and 70 I have to go down to check mine but I am sure the rod goes to the left of the column. Now I do know, again from Javelin, 68/69 are the same and 70 is different but they do swap as a whole as the linkage is different between them. I just can not see why your 69 would go to the right of the column. I would not trust pictures. Dave ---- |
|
TSM = Technical Service Manual
75 Gremlin X v8 for sale 70 Javelin 360/auto drag car 70 Javelin 360/T5 Street car |
|
cadipacer
AMC Nut Joined: Apr/22/2009 Location: louisville KY Status: Offline Points: 368 |
Post Options
Thanks(0)
|
I have the 69 pedals in my garage and it has a rod that the brake PIVOTS on but he clutch rotates WITH the rod and ANOTHER lever is clamp -fit on the end that has the rod that goes through the firewall.. seem dumb to me.
The 69 CLUTCH pedal ARM dont have any holes drilled in it . If you have a TSM 1967-69 it shows this set up. |
|
SOLD!/SOLD!78 Pacer wagon w/ 500 cid Cadillac V8, 2:87 spool.
1956 Nash Statesman.PS,PB AC 360 rack & pin.2:56 gears. 1982 Concord 401 4 dr. incognito former-NAMDRA # 75 AMO 645,NCCA 7980 |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |