Your donations help keep this valuable resource free and growing. Thank you.
|
77 Pacer 258-6 engine cradle bushings |
Post Reply |
Author | |
Many Pacers
AMC Fan Joined: Jul/27/2014 Location: United States Status: Offline Points: 2 |
Post Options
Thanks(0)
Posted: Jul/27/2014 at 3:36pm |
I have a 77 Pacer 258-6 and am replacing the engine mounts and would like to replace the bushings between the engine cradle and the frame. I am not sure I am accurately describing the bushings. There appears to be four and they look flat, about an inch thick rubber bolting between the engine cradle and the frame. Can someone help me with the correct parts names and where would I llok to find them. I am assuming AMC designed them to reduce engine vibration. Thanks anyone for your help.
|
|
brahlf
AMC Nut Joined: Feb/16/2010 Location: Waukesha Status: Offline Points: 361 |
Post Options
Thanks(0)
|
They're called front suspension crossmember to sill insulators.
3223125 for the front, qty 2 3223070 for the right rear 3223071 for the left rear |
|
Bruce
1969 American wagon 290 1966 American Convert 290 1972 Gremlin X Factory 304 1978 Matador Wagon 360 1989 Jeep Comanche 3 AMC Eagles, not running yet |
|
uncljohn
AMC Addicted Joined: Jan/03/2013 Location: Peoria AZ Status: Offline Points: 5394 |
Post Options
Thanks(0)
|
I have seen what you are describing and frankly I have seen more bad ones then good ones and have no idea where they are available. Although I have not had to look for one for years and even then it was not important if one was found and it wasn't. IF I were to start looking for them today I would Start with NAPA which has a large vintage parts catalog as does CarQuest. I would attempt to see a store counter guy rather than try something on line. I would also try ROCKAUTO and our AMC VENDORS. But I really do not know anyone who actually found any. |
|
70 390 5spd Donohue
74 Hornet In restoration 76 Hornet, 5.7L Mercury Marine Power 80 Fuel Injected I6 Spirit 74 232 I-6, 4bbl, 270HL Isky Cam |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |