Your donations help keep this valuable resource free and growing. Thank you.
|
304 Stock Eliminator |
Post Reply |
Author | |
STOCKER1
AMC Fan Joined: Mar/19/2014 Location: east coast Status: Offline Points: 13 |
Post Options
Thanks(0)
Posted: Mar/19/2014 at 3:07pm |
I just picked up a '79 Spirit. It has a 304 and auto. Any ideas on what cam is the best? Simple 3 or 5 angle valve job? Does this motor like to rev? 4,88, 5.13 for the rear gear? I don't want a record setter, just something that can qualify in July and August and go rounds. This motor must be NHRA Stock Eliminator LEGAL. Thanks
|
|
tomslik
AMC Addicted Joined: Mar/07/2008 Location: Colorado Status: Offline Points: 680 |
Post Options
Thanks(0)
|
I'm no expert (yet), but you ARE gonna be stuck with a 2bbl...
and if Classracer chimes in, listen to him, |
|
67 american 290/4speed |
|
purple72Gremlin
AMC Addicted Charter Member Joined: Jul/01/2007 Location: Illinois Status: Offline Points: 16611 |
Post Options
Thanks(0)
|
yes a 2bbl.304s dont like to rev like some engines do. the 2bbl has to be for a 1979 304 /auto........I also have a 1979 304/auto AMX. The heads have to be 1979 too, everything on the engine has to be 1979.
|
|
FuzzFace2
AMC Addicted Joined: Jul/05/2007 Location: Angier, N.C. Status: Offline Points: 10356 |
Post Options
Thanks(0)
|
And all has to be stock so you can't ask "what cam".
NHRA rule book for the class you want to run will tell you what you can & can not do.
I think GMAN ran a Machine in that class it is not all that easy from what I saw posted.
Take the rockers you may have to go thru 3 or 4 full sets to come up with 1 set that has the same raito across all of them.
Good luck and keep us posted on the project.
Dave ----
|
|
TSM = Technical Service Manual
75 Gremlin X v8 for sale 70 Javelin 360/auto drag car 70 Javelin 360/T5 Street car |
|
Ken_Parkman
AMC Addicted Joined: Jun/04/2009 Location: Ontario Status: Offline Points: 1814 |
Post Options
Thanks(0)
|
Get someone to do the valve job who really understands stock eliminator. With the rules the way they are now any valve job is legal, and the 304 head has a nasty edge and throat that a good stocker guy would solve, and the 304 head will flow absolutely amazing. Like really amazing. Like mind blowingly good for such a small valve.
The 2bbl is scary though. What is the current 304 factor? A guy ran a 304 spirit in O I think a bunch of years ago and won a national event. the car was not fast, and did struggle on a hot summer day, but the rules are a lot more open now.
|
|
68 amc
AMC Apprentice Joined: Sep/14/2011 Location: North Syracuse Status: Offline Points: 164 |
Post Options
Thanks(0)
|
you can run roller rockers on amc 290-401,read the rule book very carefully,I run k/sa mopar.
|
|
cny amc,68 JAVELIN 360ci street& strip car 10:90
|
|
tomslik
AMC Addicted Joined: Mar/07/2008 Location: Colorado Status: Offline Points: 680 |
Post Options
Thanks(0)
|
actually, it (the cam) has to be stock lift, any duration/timing/etc and you can run roller rockers in stock aqs long as the ratio is correct for the engine |
|
67 american 290/4speed |
|
amccar
AMC Apprentice Joined: May/27/2009 Location: Tennessee Status: Offline Points: 162 |
Post Options
Thanks(0)
|
I ran K/SA back in the 70's. You can run a cam with a different ramp speed and duration. The carb I had the jets drilled out. Not very competitive in quarter but close in the eighth. I believe you can bore .30 but same compression.
|
|
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |