Your donations help keep this valuable resource free and growing. Thank you.
|
8.8 To Gremlin HELP |
Post Reply | Page <12 |
Author | |
15GremlinGuy74
AMC Fan Joined: Feb/02/2012 Location: North Port Status: Offline Points: 6 |
Post Options
Thanks(0)
|
Yes and thats what i will do in the future, however for right now i plan on just installing it to be able to drive and move it.
Now im not being a prick or rude, I bought the 20 from a spirit years ago to keep everything AMC however finding non bent hubs, finding cheap gears and parts is $$$. Next to nothing meaning ill have to grab another axle shaft from the scrap yard $10 bucks, gears are good, new drums and shoes $50 bucks, brake lines have here. So 60-80 bucks in various stuff plus a few hours cutting the tube. The AMC 20 i have to buy gears, install kit, moser axles and buy then ill be almost 1K into it-_- The 8.8 already has LSD 3.73 and if i blow the gears they are 50 bucks for more from the yard. There are NO AMC PARTS here in FL where i am. The people who have them want to much money for worn old rusty parts. Example 160 for a set of worn matched gears for cam and Dizzy that have almost 200K on them. Dave, Im not against what your striving at but i just dont want to go that route. I would if i had time and extra cash. I dont have a garage to place the car in so its roiting out in my buddys back yard. Id rather get it going to drive then wait for a deal to come around and its roited to the ground. HEY at least i didnt put a SBC in it X-P however the T5 is AMAZING on the highway!!! |
|
DavyKrawkt
AMC Apprentice Joined: Jan/01/2011 Location: Redding,Ca. Status: Offline Points: 43 |
Post Options
Thanks(0)
|
Look in to this setup with the Ford 8.8.......
Might help you decided which way to jump........
At Pick andPull.....Pricing
Complete rearend with disc brakes .....159.00
Axle Shaft.....(Passenger side).............. 36.99
you now have a strong, slightly narrower rearend, which means wider tires,
disc brakes and a 3.73 posi...hard to beat for the price and not a lot of work...
I am currently putting this set up in a 77 Pinto Panel, with a 351 Windsor Stroked to 418
and will probably put one in my 74 AMX Javelin with a 401...as well...
Hope it helps
DavyKrawkt
|
|
1973 AMX Javelin
Pierre Cardin Edition What goes around.....comes around....... |
|
farna
Supporter of TheAMCForum Moderator Lost Dealership Project Joined: Jul/08/2007 Location: South Carolina Status: Offline Points: 19676 |
Post Options
Thanks(0)
|
There's a similar write-up on shortening an Explorer axle here on the Forum. Search 8.8 and you'll find it.
|
|
Frank Swygert
|
|
Post Reply | Page <12 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |