Your donations help keep this valuable resource free and growing. Thank you.
|
Model 20/Moser Axle kits/model 20 |
Post Reply | Page <1 345 |
Author | |
matty 401
AMC Addicted Joined: Jul/06/2007 Location: Iowa Status: Offline Points: 1727 |
Post Options
Thanks(0)
|
my son got a set of one piece axles from doctor diff they seam to be a very nice piece went in no problem they are a 1 size fits all just measured his and trimmed off what we did not need
|
|
72 matador 401 the beast
79 concord 2 door 72 matador 304 grasshopper 68 Rogue 406 93 Cherokee 4.0 5 speed |
|
jpnjim
AMC Addicted Joined: Nov/25/2007 Location: New England Status: Offline Points: 2752 |
Post Options
Thanks(0)
|
I ordered 35 spline Dana 60 shafts from Moser 10-15 years ago, (B-body Dodge D60)
and they must think the Mopar guys can measure better than the AMC guys because they didn't ask me to send my old shafts for that axle. But yes, both shafts were off from my dimensions, they worked anyway, but I remember being surprised that their machine shop couldn't measure as close as I could with a tape measure. Oh well, the shafts have held up to everything I've thrown at them without a whimper, so what's a couple 1/8's of inches
|
|
71 P-code 4spd Javelin/AMX
some Jeeps and some Fords |
|
Airdrie AMX
AMC Nut Joined: Aug/08/2010 Location: Alberta, Canada Status: Offline Points: 329 |
Post Options
Thanks(0)
|
I don't understand why moser is still insisting people send there old axles in, I have ordered multiple sets of these without any problem. I always dealt with Shane, not sure if he is still with moser but he is well versed with AMC axles. The measurement needed was simply length of axle from splined end to flange end wheel mounting surface and bolt pattern. I always have them made a little long, the splines are always cut further up the axle so they can be trimmed to length.
|
|
72 amx javelin 401 4spd
|
|
Hollywood
AMC Apprentice Joined: Feb/23/2016 Location: Billerica, Mass Status: Offline Points: 41 |
Post Options
Thanks(0)
|
I have recently noticed a notice in my rear right side backing up or turning tightened lugs new tires. BRAKES LOOK GOOD ? 1968 AMX go pac 4 speed!
|
|
Hollywood
AMC Apprentice Joined: Feb/23/2016 Location: Billerica, Mass Status: Offline Points: 41 |
Post Options
Thanks(0)
|
Making almost like a grinding sound!
|
|
7172AMX
AMC Apprentice Joined: May/20/2015 Location: South Carolina Status: Offline Points: 124 |
Post Options
Thanks(0)
|
Faster, Reviving this per your tapered bearing comment. I don't know if you can speak to the DrDiff version of the axle swap which I'm thinking on doing but if you can pass along any details how it worked out I'd be interested and grateful. thanks! |
|
GoPacKman
71 JavAMX 401 T-10 354TG 72 JavSST 360 727 315TG 98 Jeep Cherokee Classic 4.0 4WD |
|
Repsolroger
AMC Nut Joined: Aug/23/2021 Location: washington Status: Offline Points: 376 |
Post Options
Thanks(0)
|
I used Dr differential 1 piece axles...on my model 20 ...just had to cut them to length
|
|
1969 sst javelin restomod
|
|
Post Reply | Page <1 345 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |