Your donations help keep this valuable resource free and growing. Thank you.
|
Drag Racing PHX |
Post Reply |
Author | |
idrambler
Supporter of TheAMCForum Joined: Jul/02/2007 Location: Nampa,Idaho Status: Offline Points: 2942 |
Post Options
Thanks(0)
Posted: Feb/23/2008 at 12:00pm |
Josh York and his AMC powered Gremlin made it through 1st round of S/ST today
http://www.dragracecentral.com/DRCPhoto.asp?ID=152301&Filter=100#indextop |
|
Jim....AMCRC
Treasure Valley AMC Club, Pres 69 AMX 401/727 74 GremlinX 401/727race only 73 Matador 2dr HT 360/727 |
|
GremlinXman
AMC Nut Joined: Jul/26/2007 Location: Connecticut Status: Offline Points: 227 |
Post Options
Thanks(0)
|
Jim that's cool. So when we gonna see a pic of your car like that?
You hittin the 10's this year? You do anything to your car over the winter?
Davis
|
|
72 Gremlin X was 360 Auto ran 12.6 @ 107 now 406 CI Auto 11.035 @ 121
|
|
idrambler
Supporter of TheAMCForum Joined: Jul/02/2007 Location: Nampa,Idaho Status: Offline Points: 2942 |
Post Options
Thanks(0)
|
Have not done a thing to mine yet.....need to get the trany fixed...and new wheel studs
and tires on the rear.....no other changes planed....and it is fast enough for me.... OH...I forgot York survived 2nd rd..... Big RED eye in rd3..yuk......... http://www.dragracecentral.com/drcphoto.asp?ID=152316#indextop This guy is at Gainesville this weekend running S/ST looks like he lost 1st rd .. there is an 80 Spirit in the winners list for 1st rd .. not sure either are AMC powered..... Edited by idrambler - Feb/24/2008 at 7:01am |
|
Jim....AMCRC
Treasure Valley AMC Club, Pres 69 AMX 401/727 74 GremlinX 401/727race only 73 Matador 2dr HT 360/727 |
|
chaez2
AMC Nut Joined: Aug/18/2008 Location: tennessee Status: Offline Points: 102 |
Post Options
Thanks(0)
|
hey im looking for some advice my 70 javelin now with a 72 401 is running 11,40,s in the 1/4 mile i have vinolia 14-1 dome top pistons with h-beam rods with factory forged crank 544 lift cam rpm air gap intake hooker super comp headers ford 9inch rear end3.89 gears i have the biggest valves possible ported and polished with a rpm air gap i am up for suggetion i want to go faster it seems to be hooking 149 60 ft. i know nitrous would help is anyone running the eldelbrok aluminum head sure hate to spend the money and not get no faster im eating up these chevy guys and they hate it im ready to take out some big dogs AMC NUT AL(KEEPING IT ALIVE)
|
|
FuzzFace2
AMC Addicted Joined: Jul/05/2007 Location: Angier, N.C. Status: Offline Points: 10356 |
Post Options
Thanks(0)
|
Need a little more info. Like trany used and gears in it, rear tires, more cam info. Like duration, what you using for a carb & fuel system, timing and RPM at the line? That I don’t think is a bad time. BTW I know of a 360 that is running a cam, headers, torker intake & 343 flat tops running 11.50 and on 150hp spray 10.50 in a 68 or 69 Jav. My 70 Jav only runs 13.0’s with a 280H cam, headers, torker intake & 4.56 gear. Both of us run TH400 with 3000 to 4000 stall. Dave ---- |
|
TSM = Technical Service Manual
75 Gremlin X v8 for sale 70 Javelin 360/auto drag car 70 Javelin 360/T5 Street car |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |