A/C sensor line routing?

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Well, I've gotten to the A/C line routing- temp sensor from the switch into the evaporator. Can't even begin to remember the routing for this thing. Of course, I forgot that I have to remove the evaporator box to install the probe!! So, in TSM nothing is really mentioned, I figured the probe goes in next to the in lines from the condenser. Where does the little tiny clamp go (looks like a smaller version of the wiring harness clamps/looms). I can't find any mounting spot on the housing since it's covered with new foam.Then where does the line run from the housing to the switch, so as to not get crushed,bent, or broken?
I thought I was going forward, but more seems to be coming back out.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
bbgjc Members Profile Send Private Message Find Members Posts Add to Buddy List AMC Addicted Joined: Nov/24/2009 Location: No.VA Status: Offline Points: 1660	Post Options Post Reply Quote bbgjc Report Post Thanks(0) Quote Reply Topic: A/C sensor line routing? Posted: Dec/16/2010 at 11:56am
	Well, I've gotten to the A/C line routing- temp sensor from the switch into the evaporator. Can't even begin to remember the routing for this thing. Of course, I forgot that I have to remove the evaporator box to install the probe!! So, in TSM nothing is really mentioned, I figured the probe goes in next to the in lines from the condenser. Where does the little tiny clamp go (looks like a smaller version of the wiring harness clamps/looms). I can't find any mounting spot on the housing since it's covered with new foam. Then where does the line run from the housing to the switch, so as to not get crushed,bent, or broken? I thought I was going forward, but more seems to be coming back out.