Your donations help keep this valuable resource free and growing. Thank you.
|
Throttle linkage ball stud size for Carter BBD |
Post Reply |
Author | |
Ricardo540
AMC Apprentice Joined: Sep/29/2014 Location: Ecuador Status: Offline Points: 35 |
Post Options
Thanks(0)
Posted: Feb/11/2020 at 12:52pm |
Hey everyone, in the process of switching from the stock Carter 2 barrel bbd to the 350cfm 2 barrel holley street avenger I am in the need of the throttle linkage ball stud, but I dont know what size to buy between the 1/4 or the 5/16 ball stud...
which size comes equiped from factory for the OEM throttle cable? because the cable has never been changed. Or how can I measure the hole where the ball would enter inside the throttle cable in order to know? |
|
matty 401
AMC Addicted Joined: Jul/06/2007 Location: Iowa Status: Offline Points: 1730 |
Post Options
Thanks(0)
|
holley makes a kit with a few different sizes not sure what size are in the kit but i have used them on my carb swaps hope that helps
|
|
72 matador 401 the beast
79 concord 2 door 72 matador 304 grasshopper 68 Rogue 406 93 Cherokee 4.0 5 speed |
|
Heavy 488
AMC Addicted Joined: Apr/27/2019 Location: In the Status: Offline Points: 3529 |
Post Options
Thanks(0)
|
I guess I'm the only one with calipers. The answer is 1/4"
|
|
Ricardo540
AMC Apprentice Joined: Sep/29/2014 Location: Ecuador Status: Offline Points: 35 |
Post Options
Thanks(0)
|
Thanks to both of you! will go with the holley kit when I need it.
|
|
matty 401
AMC Addicted Joined: Jul/06/2007 Location: Iowa Status: Offline Points: 1730 |
Post Options
Thanks(0)
|
if i remember there is a small arm on the backside of the linkage that is where the ball will go might have to lengthen the throttle arm
|
|
72 matador 401 the beast
79 concord 2 door 72 matador 304 grasshopper 68 Rogue 406 93 Cherokee 4.0 5 speed |
|
PHAT69AMX
AMC Addicted Joined: Jul/07/2007 Location: West Virginia Status: Offline Points: 5903 |
Post Options
Thanks(0)
|
I can't seem to find the 'Calipers' app on my phone....
|
|
Heavy 488
AMC Addicted Joined: Apr/27/2019 Location: In the Status: Offline Points: 3529 |
Post Options
Thanks(0)
|
Seems to be spreading over the years. On the job, my dial caliper always turned up missing. Solved the problem by using the vernier instead. Not many could read it.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |