Your donations help keep this valuable resource free and growing. Thank you.
|
Max Tire for Gremlin |
Post Reply | Page <12 |
Author | |
Hurst390
AMC Addicted Joined: Apr/20/2008 Location: secret Status: Offline Points: 5822 |
Post Options
Thanks(0)
|
You might get by with that tire being a radial. But a Bias ply tire would grow to the point of closing the gap on the front side of your wheelwell.
I had a little more clearance than you with a bias et drag tire and it would grow and start rubbing at about 135mph.
|
|
SC/Hurst Rambler
11.62 120 100% Street Legal |
|
WesternRed
AMC Addicted Joined: Aug/03/2010 Location: Australia Status: Offline Points: 5808 |
Post Options
Thanks(0)
|
It's got about 1/2" at the front and rear with the radial and I'm not getting anywhere near 135 mph, more like 112-115. I don't think the sizing is 100% accurate either, it seems like either the radial is smaller than 28" or the slick was bigger than 26", probably the latter. I've only dropped about 200-300 RPM across the line, should have been more like 500.
I still have to rust repair the wheel arches, so could make some changes while I'm at it.
|
|
I've finally given up drinking for good...........now I only drink for evil.
|
|
Post Reply | Page <12 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |