Your donations help keep this valuable resource free and growing. Thank you.
|
Fuel Shooting out of Carb |
Post Reply | Page 123> |
Author | |
sweetevil28
AMC Apprentice Joined: Dec/20/2013 Location: United States Status: Offline Points: 54 |
Post Options
Thanks(0)
Posted: Mar/25/2017 at 8:28pm |
Hey All, I have a problem. Fuel is shooting up in a cloud out of my Edelbrock 650 Carb when I try to turn over my Gremlin's 304. Here are some changes i made before trying to start the engine, any tips on what I may have missed when i went messing around with it?
1. Replaced Lifters - Covered them in break-in oil 2. Replaced Push Rods 3. New HEI Distributor & Cam gear (Plug wires are in the right order & It's installed in the correct side of the 180) 4. New OEM Fuel pump 5. The Edelbrock Carb has been sitting for about 5 years, worked well before I took it off. Any help is very appreciated! |
|
304-dude
AMC Addicted Joined: Sep/29/2008 Location: Central Illinoi Status: Offline Points: 9082 |
Post Options
Thanks(0)
|
Did you clesn out the carb? After 5 years dry I bet there is need for some maintence. Left over fuel not cleaned out will clog things up.
|
|
71 Javelin SST body
390 69 crank, 70 block & heads NASCAR SB2 rods & pistons 78 Jeep TH400 w/ 2.76 Low 50/50 Ford-AMC Suspension 79 F150 rear & 8.8 axles Ford Racing 3.25 gears & 9" /w Detroit locker |
|
Moffman
AMC Nut Joined: Sep/28/2011 Location: New Jersey Status: Offline Points: 287 |
Post Options
Thanks(0)
|
Sounds like distributor is 180 off, did you check to see if it's doing it with the ignition disabled?
|
|
AMXRWB
AMC Addicted Joined: Apr/25/2013 Location: Midwest Status: Offline Points: 1154 |
Post Options
Thanks(0)
|
Stuck carb float
|
|
tufcj
Supporter of TheAMCForum Supporter of TheAMCForum Joined: Jul/10/2007 Location: Watkins, CO Status: Offline Points: 4097 |
Post Options
Thanks(0)
|
+1 If that carb got put on the shelf with any fuel in the bowls, it needs a rebuild. Bob tufcj |
|
69 AMX
74 Javelin AMX 67 Rogue If you need a tool and don't buy it... you'll eventually pay for it... and not have it. Henry Ford |
|
sweetevil28
AMC Apprentice Joined: Dec/20/2013 Location: United States Status: Offline Points: 54 |
Post Options
Thanks(0)
|
I flipped the distributor 180 and it had an ignition when i turned the key that shot out smoke from the carb. Then when i manually rotated the cam I could see smoke come out of the carb each time I rotated it. What does that say?
|
|
ccowx
AMC Addicted Joined: Nov/03/2010 Location: Yukon Status: Offline Points: 3510 |
Post Options
Thanks(0)
|
Could be both the dissy being out and the carb. I would first check the needle and seat, because it is likely stuck. You could also look down the carb as the engine is turned. It may be flooding all over the place if the needle and seat is stuck. You probably don't want to have it fire if it is flooding like that.
Whatever you do, have a fire extinguisher handy or the whole problem may be moot! Chris
|
|
990V8
AMC Addicted Joined: Oct/07/2016 Location: Gloucestershire Status: Offline Points: 789 |
Post Options
Thanks(0)
|
The 2300 on my 327 is flooding out of the top vent.
I put a 'rebuilt carb on, and that's flooding even worse, so I'm feeling pretty fed up as I want to drive the car. I read that it's a regular problem with Holleys. Maybe the float/needle set is just not well designed. Take off the fuel chamber, replace the needle & seat, see here for which one you need http://documents.holley.com/199r10684rev.pdf check the float is free and the spring hasn't collapsed. After you replace the needle/seat, reset the wet fuel level. Ivor |
|
63 Canadian Ambo 990 V8 327
74 LandRover Lightweight V8 SIII Shopping Trolley |
|
Boris Badanov
AMC Addicted Joined: Dec/14/2013 Location: NH USA Status: Offline Points: 4209 |
Post Options
Thanks(0)
|
Skipped cam timing and or stripped cam timing gear.
|
|
Gremlin Dreams
|
|
304-dude
AMC Addicted Joined: Sep/29/2008 Location: Central Illinoi Status: Offline Points: 9082 |
Post Options
Thanks(0)
|
Had thst happen twice but never had carb spit out with thw 2100 carb. Maybe it is diff with his. I still think his carb I gummed up. |
|
71 Javelin SST body
390 69 crank, 70 block & heads NASCAR SB2 rods & pistons 78 Jeep TH400 w/ 2.76 Low 50/50 Ford-AMC Suspension 79 F150 rear & 8.8 axles Ford Racing 3.25 gears & 9" /w Detroit locker |
|
Post Reply | Page 123> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |