Your donations help keep this valuable resource free and growing. Thank you.
|
6 Barrel 401 |
Post Reply | Page <1 4567> |
Author | |
Javelin_GT
AMC Addicted Joined: Feb/15/2008 Location: Colorado Status: Offline Points: 1066 |
Post Options
Thanks(0)
|
Tom..........I fixed the links for you. The cheapest route to a AMC 6 barrel intake is the Indy Mod Man. Or you have to go custom and custom isnt cheap. I think if you send Hogan a performer or other cheap intake they can build off the base and save you some money. Has been a few years since I spoke with them about it. I see $3500 cross rams so $4000 for custom built intake.....designed for your exact motor.....doesnt seem that ridiculous to me.
|
|
Javelin_GT
AMC Addicted Joined: Feb/15/2008 Location: Colorado Status: Offline Points: 1066 |
Post Options
Thanks(0)
|
Saw this on Facebook |
|
jpnjim
AMC Addicted Joined: Nov/25/2007 Location: New England Status: Offline Points: 2752 |
Post Options
Thanks(0)
|
I think they need a new potato to take pictures with It looks WAY cooler than I though it would with the 3x Holley's tho Is that a Hogan intake? ^If yes I bet it goes as good as it looks!
I would bet real money that a properly designed Hogan 3x2 intake would outperform an original Crossram as well! Coolness factor is hard to weigh, so retaining resale value would be the only sure place I can see a Crossram beating a custom 3x2 intake in the future. Edited by jpnjim - Nov/04/2018 at 9:42am |
|
71 P-code 4spd Javelin/AMX
some Jeeps and some Fords |
|
pfordamx
AMC Apprentice Joined: Sep/13/2010 Location: OKC Status: Offline Points: 173 |
Post Options
Thanks(0)
|
I actually priced a hogan one just like the car craft piece is about 3000 not 4000. with a flat top its about 2500.
|
|
joelash1
AMC Fan Joined: Dec/01/2010 Location: S. Alabama Status: Offline Points: 21 |
Post Options
Thanks(0)
|
I have a TRACO 2-4Bbl AMC manifold that I'm hoping to put on a 390-68 AMX. I assume these manifolds were meant for Carter/Edelbrock carburetors. Is this right?? Also, there is a threaded hole in the back about where the Heater Control Valve would normally be. Is this used for some sort of Crankcase Ventilation?? Any other info would be helpful. Thanks!!! I have photos but can't figure out how to paste.
|
|
Javelin_GT
AMC Addicted Joined: Feb/15/2008 Location: Colorado Status: Offline Points: 1066 |
Post Options
Thanks(0)
|
On other forum that is pretty defunct now there was a guy who went by the name HILLBILLYBOB. He had a TRACO 2x4 intake on his AMX road racer.
Does yours have a removable top? |
|
6speedamc
AMC Addicted Joined: Aug/26/2009 Location: Spencerport, NY Status: Offline Points: 738 |
Post Options
Thanks(0)
|
Got mine back yesterday...
|
|
64290Americanconv-ForSale
69Jav390-DadboughtNew! 69BBBJav3904spModpkg-ForSale 69BBBAMX SC/R-A,RWBMachine,TAJav 70BBB3904spAMX-ForSale 70BBOAMX 70BBGDonohue SC360,72GremlinX3905spd 72P.C.Jav/AMX74AMX |
|
Trader
AMC Addicted Joined: May/15/2018 Location: Ontario Status: Offline Points: 6881 |
Post Options
Thanks(0)
|
Work of art!!!
|
|
bobsterfl
AMC Nut Joined: Jun/18/2009 Location: Orlando, Fl Status: Offline Points: 261 |
Post Options
Thanks(0)
|
Back in the day, there was a company called Man-A-Fre that made a manifold using four Rochester two barrels in a staggered arrangement, with one caarb directly over each pair of intake ports. I can't recall if they ever made anything for AMC's or not.
|
|
Bobsterfl
1970 BBO Javelin 390 - Torqueflight |
|
bobsterfl
AMC Nut Joined: Jun/18/2009 Location: Orlando, Fl Status: Offline Points: 261 |
Post Options
Thanks(0)
|
Check out this site also on the Bill Kraft Rambler fitted with four two barrels.
|
|
Bobsterfl
1970 BBO Javelin 390 - Torqueflight |
|
Post Reply | Page <1 4567> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |