Your donations help keep this valuable resource free and growing. Thank you.
|
New Carb Revving HIGH! PICTURES |
Post Reply | Page <123 |
Author | |
FSJunkie
AMC Addicted Joined: Jan/09/2011 Location: Flagstaff, AZ Status: Offline Points: 4742 |
Post Options
Thanks(1)
|
No problem. Respect of young people in the classic car hobby is a big soap box of mine. Do you know the most common reason for why people put others down? For why they insult others? It's because they are insecure about themselves, or more specifically are insecure about how they are seen within a group of people. They are worried about their "status" within that group. They see a newcomer, a younger person, a weaker person, or a more ignorant person as an opportunity to prove they are of a higher status. They insult that person to make that person look weaker while making themselves look stronger. It's very masculine and caveman. Competitive. Primal. The males of almost all species do it. They compete for status and respect. The young ram wants status, the old ram wants to defend it, so they see each other as threats and fight. The weak are seen as easy targets to demonstrate one's status. Human men do it too. Especially online. Especially in car groups. Most wars and atrocities can be traced to this. "We are strong, they are weak, let's go kill them and take their property." We must resist that. Especially if we want young people to join us. We must find ways to be secure in ourselves and not see others as a threat or competition. If we do that, there is no reason to insult others or put them down. Everybody is happier. I think the entire world would benefit from that.
Edited by FSJunkie - Sep/01/2018 at 11:46pm |
|
1955 Packard
1966 Marlin 1972 Wagoneer 1973 Ambassador 1977 Hornet 1982 Concord D/L 1984 Eagle Limited |
|
tomslik
AMC Addicted Joined: Mar/07/2008 Location: Colorado Status: Offline Points: 680 |
Post Options
Thanks(0)
|
leaving the needle out will NOT cause a fast idle but it WILL let the gas out all over the place IF it runs at all.... |
|
67 american 290/4speed |
|
tyrodtom
AMC Addicted Joined: Sep/14/2007 Location: Virginia Status: Offline Points: 6214 |
Post Options
Thanks(0)
|
Like I said, I haven't done the exact same mistake, and I didn't say it would cause a fast idle.
But I have installed a carb with a hole in the float, and it did display close to the same symptom. When I cranked it, the RPM ran away, couldn't control it, I cut the ignition off in about 1-2 seconds. When I looked under the hood, yes, there was gas spilling out of the carb, it probably would have choked itself to a stop from way too much gas if i'd let it run longer, I just didn't give it a chance. But the point being the car will start, if it's a quick starting engine, even if there is completely no control of the fuel coming into the carb float bowl. But the RPM will instantly climb and you won't be able to stop it, except by killing the ignition. The difference being most of my AMC engines started very easy, ( just shake the keys at it, as they say ) no long cranking period unless it was very cold.
Edited by tyrodtom - Sep/02/2018 at 10:54am |
|
66 American SW, 66 American 2dr, 82 J10, 70 Hornet, Pound, Va.
|
|
Brad2192
AMC Fan Joined: Aug/26/2018 Location: Rhode Island Status: Offline Points: 26 |
Post Options
Thanks(0)
|
It wound up being the issue. The new carb did not come with the piece only the gasket, but when it was out it revved up to the point of almost grenading. The next day when I got out of work I pulled off the line before the float chamber and tossed it in there, wound up working just fine now.
|
|
Greyhounds_AMX
AMC Addicted Joined: Nov/14/2009 Location: Kansas City Status: Offline Points: 1268 |
Post Options
Thanks(0)
|
By "tossed it in there" did you mean you disassembled the float bowl, installed the needle and attached it to the float, set the float level, then reassembled the carb?
|
|
1968 AMX 390 w/T5
|
|
Post Reply | Page <123 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |