Your donations help keep this valuable resource free and growing. Thank you.
|
Engine build date |
Post Reply |
Author | |
Bandana
AMC Nut Joined: Jul/26/2016 Location: NC Status: Offline Points: 473 |
Post Options
Thanks(0)
Posted: Feb/20/2018 at 12:54pm |
Finally getting some numbers off my engine. 3196291C on the heads which I understand are the good 1970 heads. The block has the "401" casting on the side and has the part number of 3198951 which from what I found is a 401 block from 1971 til 1978 .... Is there a way to narrow down the date the engine was put together - without a valve cover tag????
|
|
amc67rogue
AMC Addicted Joined: Nov/05/2008 Location: Phx. AZ. Status: Offline Points: 1578 |
Post Options
Thanks(0)
|
Early 71 401s had the 6291 head castings.
|
|
Keith Coggins 67Rogue X code
|
|
Bandana
AMC Nut Joined: Jul/26/2016 Location: NC Status: Offline Points: 473 |
Post Options
Thanks(0)
|
Trouble is I don’t know if the heads are original to this engine...
|
|
ramblinrev
Moderator Group Joined: Dec/28/2008 Location: Wisconsin Status: Offline Points: 11535 |
Post Options
Thanks(0)
|
And those early '71 heads could be 291I rather than 291C.
Heads and block should have a casting year with a small pointer, like on a dial. That helps show when those items were cast. |
|
74 Hornet Hatchback X twins (since 1977)
62 American Convertible (still worth the $50 I spent in 1973!) AMCRC #513, AMO #384 70 AMX 360 4-speed (since 1981) |
|
Boris Badanov
AMC Addicted Joined: Dec/14/2013 Location: NH USA Status: Offline Points: 4209 |
Post Options
Thanks(0)
|
Block casting date is in the lifter gallery.
Also the foundry ID as to where it was cast is there. If it's a 70 through 76 it should be a CFD block. CFD is GM. Yep, GM cast our beloved ramblers for a number of years. |
|
Gremlin Dreams
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |